SPL PRO front endlinks

MX52Z · 04-10-2013, 08:16 AM

Quote:

Originally Posted by Mitco39

I am looking to pick up a pair of these, but got a quick question to those who have them.

How do you adjust them? Do you have to pull off one of the ends turn it to length and re install? If that is the case how do you reinsert the sway into the endlink when you want to get it as snug as possible? Use a jack on the sway? The rear ones you can just turn the center and leave both ends connected, not so much on these.

Just installed them this weekend. My car was on stands for some other installs but basically you'd have to disconnect the link from the sway bar and rotate to adjust then re-tighten the lock nut.

To install, I used a floor jack to nudge up the lower control arm so I could get the link into the shock mount which was a little bit of a pain. I forgot to grease up that part of the link so I'm wondering if I have to redo the process.

steeds · 03-08-2014, 12:56 PM

How much longer can you extend the SPL end links over stock? Both front and Rear?

SPOHN · 03-08-2014, 06:42 PM

Quote:

Originally Posted by steeds

How much longer can you extend the SPL end links over stock? Both front and Rear?

A good bit. More than you will ever need.

TreeSemdyZee · 05-18-2014, 09:18 AM

I know I'm reviving and old thread, but I think my issue relates to the topic, so I put it here.

I just installed Nismo S-Tune front suspension and SPL Pro Endlinks. Now I'm getting a lot of squeaking when I go over bumps as well as some clunking.

Any idea what this might be? Pre-load maybe.

I'm so frustrated because it took me forever to get this suspension installed, now it sucks.

Update: YEAHHHHH! Before I left for church this morning, I sprayed some penetrating oil on one of the end links. Squeak went away. As I drove around the clunking got worse. Once I got home I put it on ramps and saw that one of the end links was badly crooked. Enough that there probably wasn't much movement possible. I also saw that the link on the other side was quite crooked against the sway bar, so I pulled that one out and extended it so it was parallel. Clunk and squeaking are now gone.

03-08-2014, 12:56 PM	#17 (permalink)
steeds Base Member Join Date: Nov 2013 Location: Austin, TX Posts: 145 Drives: 2012 370z Touring MT Rep Power: 11	How much longer can you extend the SPL end links over stock? Both front and Rear? __________________

05-18-2014, 09:18 AM	#19 (permalink)
TreeSemdyZee Premium Member Join Date: Dec 2009 Location: Kentuck-IANA Age: 59 Posts: 4,875 Drives: '09 370 & ‘14 Juke Rep Power: 27408	Squeaking! I know I'm reviving and old thread, but I think my issue relates to the topic, so I put it here. I just installed Nismo S-Tune front suspension and SPL Pro Endlinks. Now I'm getting a lot of squeaking when I go over bumps as well as some clunking. Any idea what this might be? Pre-load maybe. I'm so frustrated because it took me forever to get this suspension installed, now it sucks. Update: YEAHHHHH! Before I left for church this morning, I sprayed some penetrating oil on one of the end links. Squeak went away. As I drove around the clunking got worse. Once I got home I put it on ramps and saw that one of the end links was badly crooked. Enough that there probably wasn't much movement possible. I also saw that the link on the other side was quite crooked against the sway bar, so I pulled that one out and extended it so it was parallel. Clunk and squeaking are now gone. Last edited by TreeSemdyZee; 05-18-2014 at 03:26 PM.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
TUNERZ STORE \| Whiteline rear adjustable endlinks Nissan 370z	Tunerz_Store	Suspension/Brakes	291	05-03-2018 10:09 AM
SPL Front and Rear Endlinks-Now Available!!!	FBNISSAN	Suspension/Brakes	237	12-03-2015 11:48 AM
Sway Bar Endlinks	corbin09	Brakes & Suspension	17	11-18-2015 08:18 AM
[WTB] front endlinks	VolcanoG07	Parts for sale (Private Classifieds)	11	10-25-2012 12:48 PM
I am looking for front endlinks for my 370Z.	VolcanoG07	Suspension/Brakes	0	10-20-2012 01:00 PM