Front camber Plates???

Marblez10 · 10-12-2012, 02:09 PM

Someone told me I should get Front camber plates. I have .9 front 1 rear. I don't think upper arms are same as plates but I can't find any place that sells them, I Also need the toe bolts. Can anyone help me out with some info?

DR_ · 10-12-2012, 03:05 PM

You don't really need anything with -.9 front and -1 rear.

sig11 · 10-12-2012, 03:25 PM

Also just a note... the way the Z34's suspension works you have to use upper control arms to change camber.

Marblez10 · 10-12-2012, 06:24 PM

Thanks for response.. maybe some.more.info will help. I have 20in rims on use it for everyday use. I got.it aligned today so this is what was suggested to me due to tire wear. Plates don't exist for 370z so upper arms and rear bolts were suggested. I got a price or those but what is the difference between that setup and getting the eibach pro.alignment kit?

sig11 · 10-13-2012, 10:33 AM

Upper arms are what's in the eibach pro alignment kit.

But like DR pointed out, you're well within spec for camber.

10-12-2012, 02:09 PM	#1 (permalink)
Marblez10 Base Member Join Date: Mar 2012 Location: miami, fl Posts: 8 Drives: 09 Nissan 370z PW AT Rep Power: 13	Front camber Plates??? Someone told me I should get Front camber plates. I have .9 front 1 rear. I don't think upper arms are same as plates but I can't find any place that sells them, I Also need the toe bolts. Can anyone help me out with some info?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Front Camber vs. Rear Camber	osbornsm	Brakes & Suspension	2	02-21-2012 04:12 PM
Camber Plates	Jeffblue	Brakes & Suspension	26	09-14-2010 01:25 PM
Front Plates on the 370z	perfectnobody	Nissan 370Z General Discussions	43	07-28-2010 08:59 PM
No front plates where required?	Zcott	Nissan 370Z General Discussions	23	06-23-2009 07:23 PM
petition: no front plates in CA	tru_Asiatik	Southern California Region	12	05-01-2009 08:51 PM

10-12-2012, 03:05 PM	#2 (permalink)
DR_ Track Member Join Date: Jul 2009 Location: Dallas Posts: 981 Drives: Touring/Sport M6 PG Rep Power: 16	You don't really need anything with -.9 front and -1 rear.

10-12-2012, 03:25 PM	#3 (permalink)
sig11 A True Z Fanatic Join Date: Jun 2009 Location: Detroit Posts: 1,294 Drives: 09 370Z Red Sport-MT Rep Power: 17	Also just a note... the way the Z34's suspension works you have to use upper control arms to change camber.

10-12-2012, 06:24 PM	#4 (permalink)
Marblez10 Base Member Join Date: Mar 2012 Location: miami, fl Posts: 8 Drives: 09 Nissan 370z PW AT Rep Power: 13	Thanks for response.. maybe some.more.info will help. I have 20in rims on use it for everyday use. I got.it aligned today so this is what was suggested to me due to tire wear. Plates don't exist for 370z so upper arms and rear bolts were suggested. I got a price or those but what is the difference between that setup and getting the eibach pro.alignment kit?

10-13-2012, 10:33 AM	#5 (permalink)
sig11 A True Z Fanatic Join Date: Jun 2009 Location: Detroit Posts: 1,294 Drives: 09 370Z Red Sport-MT Rep Power: 17	Upper arms are what's in the eibach pro alignment kit. But like DR pointed out, you're well within spec for camber.