KW V3 Rear Ride Height

FireDan50

you should be able to just use the spanner wrenches and turn to adjust....I've got the V3s also and I can easily lower/raise by turning the perches to adjust. Other people might chime in....

CorbinDallas

Yeah I'm familiar with how they work as far as raising and lowering is concerned. I have the purple perch all the way as high as it can go on the collar but the car just doesn't seem to sit low enough, at least compared to the others that I've seen.

chops

thats really odd...got any pics of your setup? i just checked mine and i have at least 1-1.5inches of thread left to lower the rear. i have about 1 finger gap of space also. only thing i can think of is that they gave you the wrong spring, or somehow you put the front spring in the rear and rear spring on the front..

anyway heres a crappy pic:

CorbinDallas

Thanks for that pic! I'm wondering if they sent me the wrong springs. I definitely installed the rear springs on the rear and the fronts on the front. They came packaged that way from KW. Here's some pics of mine...as you can see both sides are maxed out height wise.