Nissan 370Z Forum

Nissan 370Z Forum (http://www.the370z.com/)
-   Brakes & Suspension (http://www.the370z.com/brakes-suspension/)
-   -   Robispec Chassis/Harness Bar (http://www.the370z.com/brakes-suspension/58682-robispec-chassis-harness-bar.html)

sig11 09-01-2012 11:36 AM

Sorry I didn't get to include this before. Door Side Harness Mount This is what I was planning on using at for the door side. It comes with all the bushings and things you need to keep the stock functioning properly.

martin's right.. Best way is to drill the floor and trans tunnel for the 6pt harnesses. Most seat mounts have a thing to mount the stock belt receiver to as well which could also be used for the tunnel side lap belt in a pinch.

cdoxp800 09-01-2012 08:41 PM

Could I get the info and pricing on the bar?

Thanks

ZInferno0248 09-08-2012 10:01 PM

Quote:

Originally Posted by cdoxp800 (Post 1897870)
Could I get the info and pricing on the bar?

Thanks

PM Sent

Rusty 09-09-2012 06:24 AM

I got my bar, and installed it. Got pic's of the istall. I'm going to post the pic's and a short how to on the install. Can't do that intil my desk top PC is fixed. Have a bad card in it. It also has my pictures in it too. :mad: For now, I'm using my work computer.

cdoxp800 09-10-2012 07:29 PM

Well called today about the robispec chassis bar. Real nice people over there at robispec. Super knowledgeable too.
It's Built of thin-wall mild steel like a road-racing NASA or SCCA roll cage.
I will be getting this soon.

GaleForce 09-10-2012 08:46 PM

Quote:

Originally Posted by cdoxp800 (Post 1910534)
Well called today about the robispec chassis bar. Real nice people over there at robispec. Super knowledgeable too.
It's Built of thin-wall mild steel like a road-racing NASA or SCCA roll cage.
I will be getting this soon.

Did you happen to ask about adding loops for harnesses?

cdoxp800 09-10-2012 09:46 PM

Quote:

Originally Posted by GaleForce (Post 1910603)
Did you happen to ask about adding loops for harnesses?

Nope.. My harness is the bolt in type. So I am going to get the bar un-finished and have nuts welded on to it.

cdoxp800 09-10-2012 09:51 PM

Quote:

Originally Posted by threeseventy (Post 1910721)
How much do they want for that plus the welding? (I know you have the nuts)

Going to have that done locally.

Just give them a call. Super nice people

Rusty 09-10-2012 09:56 PM

Quote:

Originally Posted by cdoxp800 (Post 1910722)
Going to have that done locally.

Just give them a call. Super nice people

Robi is a nice guy. I had some questions. So I fired off an e-mail to him. He answered it in about 10 minutes of me sending it. We sent back and forth about 10 e-mails in the space of about 45 minutes. He answered everything. :tiphat:

takjak2 09-11-2012 10:29 AM

Had to call to get mine shipped, but it's on the way finally.

FireDan50 09-11-2012 12:03 PM

still waiting to see pics or any write up of anyone installing this

Rusty 09-11-2012 12:06 PM

Quote:

Originally Posted by FireDan50 (Post 1911399)
still waiting to see pics or any write up of anyone installing this

Be later today. :tup: I'm working right now. When I get home.

fuct 09-11-2012 03:22 PM

Quote:

Originally Posted by Rusty (Post 1911403)
Be later today. :tup: I'm working right now. When I get home.

pfft this is much more important than your job! :tup:

binary0x01 09-11-2012 03:41 PM

PM me the photos and price please.

Rusty 09-11-2012 04:16 PM

Quote:

Originally Posted by fuct (Post 1911661)
pfft this is much more important than your job! :tup:

No job.........no Nismo.........:eek:


All times are GMT -5. The time now is 01:51 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2