![]() |
still waiting to see pics or any write up of anyone installing this
|
Quote:
|
Quote:
|
PM me the photos and price please.
|
Quote:
|
Placed my order just now..
|
Quote:
http://www.the370z.com/exterior-inte...ml#post1911814 |
Quote:
|
Harness Bar Pics
Here's mine, in black...
http://i1138.photobucket.com/albums/...0/DSC_3596.jpg http://i1138.photobucket.com/albums/...0/DSC_3602.jpg Rusty's spot-on with his install directions... definitely slide the driver's side spacer and bar in first, then shimmy the passenger side bracket in past the bar and line up the holes. It fits snug but perfect. |
Quote:
|
SEXY....i like d black
|
Quote:
What harness (brand) did you use in the blue project car where you developed the bar? |
Quote:
|
I use the schroth Profi II 6 point harness
|
Any performance difference reviews?
How's the car feel (compared to stock that is). |
Can anyone post some pics with actual harnesses installed?
|
Quote:
|
Quote:
Quote:
|
1 Attachment(s)
Got mine. Did a mod on it for my bolt in harness.
|
those are some rough looking welds cdoxp800, should hold though.
|
1 Attachment(s)
Quote:
I did not weld them. They do look rough, but there is lots to them. Chassis Bar is installed. I had it powder coated to look like the OEM Bar. It's close to the same color. All the bolts are 8.8 Grade or better thats holding it in. Now I have a good place to secure my harness to. |
Can whoever bought one of these give me a guestimate of how much it weights? Also, I've been on Robispec's website and have not seen these for sale. I've emailed them with no response. Are these still on the market?
|
Guesstimates from my install; bar itself around 15 lbs, maybe three times the stock aluminum bar whatever that weighs. Mine came with four spacers, two thicker aluminum ones that weigh maybe 1 pound each and two steel spacers that were more than 1 pound each. I ended up getting all four spacers in. There are two steel brackets that are removed as part of the install which weigh half a pound each.
So shipping weight about 20 lbs. Net install +15 lbs. Call Robi to order. |
Can anyone give me their direct link to the product? And since it replaces the oem rear strut tower bar, how was handling?
|
I tired giving the shop a call 3x but noones picking up and I cant leave a msg cuz their mail box is full. Im really interested in the harness bar
|
Quote:
|
Quote:
|
Quote:
|
Woot woot. Just got an email back from him.
|
Quote:
|
Quote:
|
Quote:
|
Just seeing this thread now, looks like a good option, it's not like there are a ton of choices out there. The real PITA is trying to find seat bases that sit as low as or lower than stock however, no good options yet as far as that goes.
|
Quote:
|
Quote:
|
I ended up with one of each bracket somehow, and yes the planted one is garbage. There are actually 2 threads about this going right now lol, I mentioned in the other one that the wedge brackets were better as well, I wonder why planted cant make a half decent bracket?
|
The base is working well for me with a custom set of feet. :P
|
Good to see these harness bars are working out
|
4 Attachment(s)
Got my Robispec Harness Bar today, actually a pretty quick turn from order to receipt. Didn't take too long to strip the interior and install. I did have a little problem with the end spacers, I needed to trim about 2 mm off of the bottom edge to get the holes to align. You can see in the pictures how the bottom is flattened out. The brace that you leave in the car when you remove the OEM bar must have been slightly different than the prototype. Regardless, only took a couple hours to install. Oh, I put the bar, spacers, and fasteners on a scale and the assembly weighed 8 pounds.
|
glad everything is looking out (I like the orange but what do I know...;-0 )
|
All times are GMT -5. The time now is 09:44 PM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2