Doran Racing NISMO RC suspension parts

gomer_110 · 01-25-2013, 10:16 PM

Quote:

Originally Posted by SPOHN

I'm going to PM you my address. Send ASAP.

Shamu · 01-26-2013, 06:02 PM

Lol! One set not ever installed on a street car. Let us know how they work out later this year. They look pretty

I tend to stick to parts most resellers carry. Specialized stuff tends to be a pain especially low volume parts like these arms. When I had little run in with curb I had replacement arm from SPC next day.

Mike · 01-26-2013, 07:38 PM

Quote:

Originally Posted by Shamu

Lol! One set not ever installed on a street car. Let us know how they work out later this year. They look pretty

I tend to stick to parts most resellers carry. Specialized stuff tends to be a pain especially low volume parts like these arms. When I had little run in with curb I had replacement arm from SPC next day.

good point there Shamu. When I had a little run-in with curbing at Carolina Motorsports park, I was able to replace my rear spc piece that bent quickly too. Never thought about the possibility of a mishap with these.

HKYStormFront · 01-26-2013, 08:25 PM

while that is a very valid point, watch this starting at the 17min mark:

Mike Skeen: 2012 Nissan 370Z Watkins Glen - YouTube

i saw the front PS arm when Dustin and I visited the Doran shop. it just had a small nick in the finish. simply amazing for such a hard hit that actually warped the car itself.

Dwnshift · 01-26-2013, 08:26 PM

Im too tired to find the guy with the rolling eyes so......
Rolling my eyes
I encourage him to provide any feed back good or bad to make our product better.
The products that we produce are intended for the track and have survived the full contact realm of real world racing in the Conti series.
If you are not seriously tracking your car....Im gonna go out on a limb and say our products are most likely not for you.
We are not a mass production parts company....but I can tell you the parts that come out of the shop are superior quality and true race spec parts.
As I type this right now there are more than a couple GT cars as well as DPs that are currently lapping under the lights ...full bore ..here at Daytona with uprights , hubs, or various suspension arms that were designed , machined or fabricated at our shop.
Just sayin

dastaco · 01-26-2013, 08:35 PM

Quote:

Originally Posted by Shamu

Lol! One set not ever installed on a street car. Let us know how they work out later this year. They look pretty

I tend to stick to parts most resellers carry. Specialized stuff tends to be a pain especially low volume parts like these arms. When I had little run in with curb I had replacement arm from SPC next day.

First you give them crap and say that they will never produce the arms, then you give them crap AFTER they've produced and sold them.

How about, since you have nothing constructive to say EVER on the topic of Doran racing or their parts you just take your constant thread crapping elsewhere. BJ has been nothing but polite and patient with you and yet at every turn you give these guys grief.. Enough is enough Shamu.

gomer_110 · 01-26-2013, 08:39 PM

Just to share what Kevin Doran told me about his philosphy on suspension component design:

The suspension component should be able to survive any abuse short of something that would bust up the wheel.

Seems pretty valid to me.

Dwnshift · 01-26-2013, 10:35 PM

Just remember
Hugs are free

dastaco · 01-26-2013, 11:24 PM

Quote:

Originally Posted by Dwnshift

Just remember
Hugs are free

Unless its for a fat chick... Fat chicks gotta pay.

Imperial · 01-27-2013, 10:21 AM

So... Can I buy these yet?

cv129 · 01-27-2013, 11:33 AM

Quote:

Originally Posted by Dwnshift

Just remember
Hugs are free

And how many soft and all natural hugs will it cost to get a set?

Dwnshift · 01-27-2013, 05:19 PM

I said hugs are free...not of any actual real world monetary value!

martin82 · 03-11-2013, 04:15 PM

my rear camber arm snapped yesterday at the track.... major failure, I need stuff ASAP! Something I can trust front and rear camber arms!

sig11 · 03-11-2013, 04:57 PM

Quote:

Originally Posted by martin82

my rear camber arm snapped yesterday at the track.... major failure, I need stuff ASAP! Something I can trust front and rear camber arms!

YOW! Didn't you have SPL camber arms? Those things are beefy.

fuct · 03-11-2013, 05:06 PM

yea martin82 what camber arms did you have?

01-26-2013, 06:02 PM	#182 (permalink)
Shamu A True Z Fanatic Join Date: Jan 2011 Location: Nor Cal Posts: 1,059 Drives: 370Z Racecar Rep Power: 19	Lol! One set not ever installed on a street car. Let us know how they work out later this year. They look pretty I tend to stick to parts most resellers carry. Specialized stuff tends to be a pain especially low volume parts like these arms. When I had little run in with curb I had replacement arm from SPC next day. __________________ Grant

01-26-2013, 08:25 PM	#184 (permalink)
HKYStormFront A True Z Fanatic Join Date: Apr 2009 Location: Greer, SC Posts: 14,954 Drives: 06 Frontier SE 6spd Rep Power: 52	while that is a very valid point, watch this starting at the 17min mark: Mike Skeen: 2012 Nissan 370Z Watkins Glen - YouTube i saw the front PS arm when Dustin and I visited the Doran shop. it just had a small nick in the finish. simply amazing for such a hard hit that actually warped the car itself. __________________ Patrick // 06 Frontier 6spd Nismosis // Mods: Uprev Tuned @ Z1 Motorsports: 257whp & 292 ft lbs 09 Pontiac G8 GXP // M6 // Sunroof // Tint... For now

01-26-2013, 08:39 PM	#187 (permalink)
gomer_110 A True Z Fanatic Join Date: Aug 2011 Location: Perrysburg, OH Posts: 17,992 Drives: '11 Nismo #528 GM Rep Power: 36940	Just to share what Kevin Doran told me about his philosphy on suspension component design: The suspension component should be able to survive any abuse short of something that would bust up the wheel. Seems pretty valid to me. __________________ '11 370Z Nismo #528 Fast Intentions \| Stillen \| Motordyne \| Uprev \| CSF \| Zspeed \| Z1 Motorsports \| AST \| Swift \| SPC \| SPL \| Whiteline \| Hotchkis \| Bride \| Schroth \| Robispec \| Cusco \| Nismo \| Volk \| Forgestar \| Hoosier \| RJM '17 Titan Bone Stock

01-27-2013, 05:19 PM	#192 (permalink)
Dwnshift Track Member Join Date: Feb 2012 Location: Cincy Posts: 717 Drives: NISMO 370Z RC Rep Power: 14	I said hugs are free...not of any actual real world monetary value! Nut_N_Much likes this.

03-11-2013, 04:15 PM	#193 (permalink)
martin82 A True Z Fanatic Join Date: Nov 2011 Location: los angeles Posts: 2,636 Drives: 12 Nissan 370Z MB M6 Rep Power: 19	my rear camber arm snapped yesterday at the track.... major failure, I need stuff ASAP! Something I can trust front and rear camber arms! Last edited by martin82; 03-11-2013 at 04:20 PM.

01-26-2013, 08:26 PM	#185 (permalink)
Dwnshift Track Member Join Date: Feb 2012 Location: Cincy Posts: 717 Drives: NISMO 370Z RC Rep Power: 14	Im too tired to find the guy with the rolling eyes so...... Rolling my eyes I encourage him to provide any feed back good or bad to make our product better. The products that we produce are intended for the track and have survived the full contact realm of real world racing in the Conti series. If you are not seriously tracking your car....Im gonna go out on a limb and say our products are most likely not for you. We are not a mass production parts company....but I can tell you the parts that come out of the shop are superior quality and true race spec parts. As I type this right now there are more than a couple GT cars as well as DPs that are currently lapping under the lights ...full bore ..here at Daytona with uprights , hubs, or various suspension arms that were designed , machined or fabricated at our shop. Just sayin

01-26-2013, 10:35 PM	#188 (permalink)
Dwnshift Track Member Join Date: Feb 2012 Location: Cincy Posts: 717 Drives: NISMO 370Z RC Rep Power: 14	Just remember Hugs are free

01-27-2013, 10:21 AM	#190 (permalink)
Imperial Enthusiast Member Join Date: Aug 2010 Location: Long Beach, CA Posts: 486 Drives: 10 Nismo 370Z PW M6 Rep Power: 14	So... Can I buy these yet?

03-11-2013, 05:06 PM	#195 (permalink)
fuct A True Z Fanatic Join Date: May 2009 Location: Sugar Land Posts: 3,692 Drives: 97' Ranger :) Rep Power: 24	yea martin82 what camber arms did you have?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
370Z Sport (option) Suspension vs. Nismo suspension	355890	Brakes & Suspension	19	07-19-2022 01:04 PM
DORAN Racing Nissan Motorsports 370Z RC Continental Tire Sports Car Challenge Series	Dwnshift	Track / Autocross / Drifting / Dragstrip	134	08-20-2013 07:51 AM
Nismo RC (race car) #001 on track with Doran racing	takjak2	Track / Autocross / Drifting / Dragstrip	93	02-05-2013 07:30 AM
Wtb: Front passenger side suspension parts... All parts :)	Carbon_z	Wanted	2	01-20-2012 12:48 AM
350Z Nismo suspension VS 370Z nismo suspension	Zat_Zuma	Brakes & Suspension	10	11-12-2010 07:42 PM