|
Well, what’s the difference in thread depth from outside to inside? If you are already down to 4/32 at the middle, then you should replace. If you are flat on
|
|||||||
|
|
LinkBack | Thread Tools | Display Modes |
07-22-2020, 07:15 PM
|
#20 (permalink) |
|
A True Z Fanatic
Join Date: Jul 2011
Location: Dallas, TX
Posts: 3,270
Drives: 09 Nismo, 16 Nismo
Rep Power: 163996   |
Well, what’s the difference in thread depth from outside to inside? If you are already down to 4/32 at the middle, then you should replace. If you are flat on inside, but 6/32 middle, then it’s more than camber.
More often than not, it’s both toe and camber being off that chew up tires. Seen someone did lowering, arms, and tires at the same time (but didn’t do alignment lol), and new tires were shredded to almost flat within 14 days of normal driving. Toe was way off. No exaggeration.
__________________
Setrab | RE-71 | SPL | JRZ | Nismo | ARK | Whiteline | RacingBrake | CJM Oil Pan | Ti shield |
|
|
| Bookmarks |
| Thread Tools | |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Help !! Big alignment problem !!! | BudzZz | Brakes & Suspension | 25 | 07-04-2012 04:59 PM |
| here are my alignment specs after swift spring install | area3z | Brakes & Suspension | 5 | 03-28-2012 07:24 AM |
| Swift Spring Alignment Spec Sheets | Jmigs81 | Brakes & Suspension | 3 | 03-01-2012 09:49 AM |
| Swift Spring screws up alignment? | Jmigs81 | Brakes & Suspension | 9 | 02-29-2012 10:46 AM |
| Swift springs and my alignment | GaleForce | Brakes & Suspension | 7 | 10-26-2011 07:03 PM |
8Likes
Threaded Mode
