Whiteline Sway Bars are AMAZING

Germanguy

I had the hotchkis swaybars on my 350z. On bad roads it made a "knickknack"-noise. After I changed the oem endlinks to aftermarket sport endlinks the problems was fixed.

Will I have this problem with the whiteline sways on my 370z also?

Thank you!

ZInferno0248

I have the Whiteline sways front and rear and have not had this noise problem. I will say, however, that the lateral locks do not prevent the rear bar from shifting, it shifts in the rear and rubs on my exhaust (slightly) after a few hard corners on the track... then you get a noise! The bars are awesome, but this is annoying

__________________
2010 370Z Nismo, Silver / GTM Stage-1 SC / Custom Tune / GTM Oil Cooler / FI Resonated Test Pipes / FI CBE / Alpine HU / Focal's / JL AMP & Sub / AP Racing BBK / TTA TE-37's / RE-11's / KW V3's / SPC Camber Arms / Whiteline Sways

Germanguy

u got the stock nismo exhaust or other aftermarket exhaust? Will this happen to the oem also ? Cant believe that whiteline didnt think about this!

ZMan8

his sig says he has Fast Intentions exhaust.

MY question is do only whitelines rub on the FI exhaust?

__________________
2010 370Z 40 Anniv., 6 MT | Fast Intentions | Swift Springs | SPC | Z1Motorsports | JWM | Redline Oils | 35% Window Tint
2015 Mazda6 | 370ZChicago: Chicago Area Cars & Coffee

Reaper42

id like to know this too

__________________
Sponsor roll call: Get Lucky Brand | TOYO TIRES | Element Graphics | Unique Fabrication
Follow on fb- Jon Sackett and Instagram @GetLucky370
GetLucky370

binary0x01

The rear end links really do help.

Ability to stay in nutral setting really lets the rear sway bar do it's job much better.

Totally worth it, thanks a lot for the advice.

__________________
Tune (by Seb@SpecialtyZ) -- Upgraded Parts List : When in doubt, use brute force; if it doesn't work, you aren't using enough.

ZInferno0248

My exhaust is from Fast Intensions... the clearances may be different than the stock exhaust. I used hose clamps (I know, lame) to stop the locks from sliding and it works perfectly now. I also rotated the exhaust bends at the joints slightly to provide more clearance.

Attended an AutoX event last weekend, really slid through the corners hard, the sways (with my awesome hose clamp mod) never slid or rubbed.

__________________
2010 370Z Nismo, Silver / GTM Stage-1 SC / Custom Tune / GTM Oil Cooler / FI Resonated Test Pipes / FI CBE / Alpine HU / Focal's / JL AMP & Sub / AP Racing BBK / TTA TE-37's / RE-11's / KW V3's / SPC Camber Arms / Whiteline Sways