Tanabe Sustech GF210 Springs!

ihatepotholes · 10-31-2011, 07:45 PM

i had these on my evo ix, they were great!

willskip · 11-01-2011, 07:29 PM

Quote:

Originally Posted by cycy89

420 doesnt sound too bad. I know for the springs it cost me 250 labor, it took them between 1-2 hours. Do you have a sound clip for your exhaust?

i still wanna check if i can find a better quote on the install. i spent $335 for Swift springs and $161 for SPC rear camber kits, so $496 for everything. i cant believe the install will cost just as much at $420.

heres a link on what i was looking at before I pulled the trigger on the Invidia Gemini Exhaust.

2010 Nissan 370z Invidia Gemini Exhaust - YouTube
370Z Invidia Gemini Exhaust - YouTube

i love how it sounds under throttle. imo just have to give it time to burn out all the residue inside.

cycy89 · 11-02-2011, 08:09 AM

Quote:

Originally Posted by willskip

i still wanna check if i can find a better quote on the install. i spent $335 for Swift springs and $161 for SPC rear camber kits, so $496 for everything. i cant believe the install will cost just as much at $420.

heres a link on what i was looking at before I pulled the trigger on the Invidia Gemini Exhaust.

2010 Nissan 370z Invidia Gemini Exhaust - YouTube
370Z Invidia Gemini Exhaust - YouTube

i love how it sounds under throttle. imo just have to give it time to burn out all the residue inside.

Yeah labor fees are pretty ridiculous .. or you can work on it yourself!
I'm thinking about getting the ARK Grip, really like the look and sound. It's really hard to compare the sound clips of different exhaust systems because the device they use to record and where they position the camera can make it sound a lot different.

vividracing · 11-02-2011, 11:17 AM

$420 sounds about right. We charge a bit more here for a lowering spring install, but it includes the alignment. If you've got a floor jack, jack stands, and basic hand tools you can tackle the job yourself.

Either way, make sure you get an alignment.

willskip · 11-02-2011, 04:14 PM

Quote:

Originally Posted by cycy89

Yeah labor fees are pretty ridiculous .. or you can work on it yourself!
I'm thinking about getting the ARK Grip, really like the look and sound. It's really hard to compare the sound clips of different exhaust systems because the device they use to record and where they position the camera can make it sound a lot different.

yeah...i used high quality headphones to try my best to hear the difference.

Quote:

Originally Posted by vividracing

$420 sounds about right. We charge a bit more here for a lowering spring install, but it includes the alignment. If you've got a floor jack, jack stands, and basic hand tools you can tackle the job yourself.

Either way, make sure you get an alignment.

the install quote is with alignment also. i have to have a shop install the springs. no tools in my garage to do the install on my own.

ihatepotholes · 11-03-2011, 02:46 PM

420 for springs installation?! Lol I paid 200 for the installation on my old car. Does anybody know what the going rate is for coilover installation and alignment?

willskip · 11-06-2011, 12:32 AM

Quote:

Originally Posted by ihatepotholes

420 for springs installation?! Lol I paid 200 for the installation on my old car. Does anybody know what the going rate is for coilover installation and alignment?

sorry i dont have a clue. but i found a shop that can install my springs for $200.

cycy89 · 11-19-2011, 12:42 PM

20mm front 20mm rear spacers

cycy89 · 11-19-2011, 12:48 PM

Quote:

Originally Posted by willskip

can you update new pics when you get spacers on. i got ichiba V1 15mm front and V2 20mm rear spacers on. im thinking bout getting Tanabe GF210 springs and a SPC camber kit but i wanna see more pics of how it looks with spacers first. nissan quoted me $420 to install the springs, rear camber kit and an alignment. too much or sounds right???

got spacers! 20 front 20 rear. looks amazing! FIC for the rear dont remember the brand for the front, but both JDM!

BattleshipGry · 11-25-2011, 01:40 PM

nice!! stance look good

gurneyeagle · 11-25-2011, 02:55 PM

Quote:

Originally Posted by BattleshipGry

nice!! stance look good

Agreed!

The stance looks great.

I've got an install scheduled for the Tanabe's and spacers (15mm front and 20mm rear) scheduled for the week of Dec 12. Your pictures just affirmed my choice.

SuperZeto · 12-09-2011, 01:24 AM

I think its even from rear to front once you've been driving it for awhile. Looks great - I think ill purchase these for by black 370.. Ill post pix.

cycy89 · 12-09-2011, 01:50 AM

Quote:

Originally Posted by SuperZeto

I think its even from rear to front once you've been driving it for awhile. Looks great - I think ill purchase these for by black 370.. Ill post pix.

gurneyeagle · 12-19-2011, 08:34 PM

Quote:

Originally Posted by SuperZeto

I think its even from rear to front once you've been driving it for awhile. Looks great - I think ill purchase these for by black 370.. Ill post pix.

Here's mine after installing the Tanabes and 15mm/20mm spacers -

cycy89 · 12-20-2011, 01:03 PM

Quote:

Originally Posted by gurneyeagle

Here's mine after installing the Tanabes and 15mm/20mm spacers -

looks awesome!

11-02-2011, 11:17 AM	#19 (permalink)
vividracing The370Z.com Sponsor Join Date: Jun 2009 Location: Gilbert, AZ Age: 37 Posts: 7,306 Drives: 350Z,370Z,GTR Rep Power: 38	$420 sounds about right. We charge a bit more here for a lowering spring install, but it includes the alignment. If you've got a floor jack, jack stands, and basic hand tools you can tackle the job yourself. Either way, make sure you get an alignment. __________________ Rocky @ Vivid ♦ 480.966.3040 x236 ♦ Rocky@vividracing.com Email, PM, or call me directly for aggressive The370Z.com member pricing!!!

11-19-2011, 12:42 PM	#23 (permalink)
cycy89 A True Z Fanatic Join Date: Jun 2011 Location: 120mph somewhere Posts: 1,097 Drives: #TTURBOZ Rep Power: 29	20mm front 20mm rear spacers __________________ Fast Intentions Twin Turbo Kit GT2860RS, 677WHP\|FI 34 row oil cooler\|F.I. CBE\|Fast 500E return fuel system\|FI trans cooler\|FI billet aluminum flex plate\|Excedy clutch packs\|ENKEI RP03\|BC BR coilovers\|SEIBON Carbon\|EVO-R Rear fog light\|GTR push start\|Whiteline sway bars, Diff bushing\|DSS axles\|ECUTekW/FlexFuelTune

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
TANABE Racing development 370Z update: TANABE springs, swaybar and underbrace	AK370Z	Brakes & Suspension	13	01-08-2010 05:03 PM
TANABE SPRINGS NF210 AND GF210 from AMPLIFIED MOTORSPORT	LOU@AMPLIFIED	Suspension/Brakes	4	11-10-2009 08:35 PM
GF210 Tanabe springs	Stealth_Z	Brakes & Suspension	8	11-10-2009 07:21 PM
F/S : Tanabe GF210	sidewayz34	Parts for sale (Private Classifieds)	7	07-15-2009 02:04 PM

10-31-2011, 07:45 PM	#16 (permalink)
ihatepotholes Base Member Join Date: Jan 2010 Location: nj Posts: 129 Drives: 2012 Boss 302 Rep Power: 15	i had these on my evo ix, they were great!

11-03-2011, 02:46 PM	#21 (permalink)
ihatepotholes Base Member Join Date: Jan 2010 Location: nj Posts: 129 Drives: 2012 Boss 302 Rep Power: 15	420 for springs installation?! Lol I paid 200 for the installation on my old car. Does anybody know what the going rate is for coilover installation and alignment?

11-25-2011, 01:40 PM	#25 (permalink)
BattleshipGry Base Member Join Date: Jun 2011 Location: SoCal Posts: 20 Drives: '10 Nissan Rep Power: 13	nice!! stance look good

12-09-2011, 01:24 AM	#27 (permalink)
SuperZeto Base Member Join Date: Aug 2011 Location: Redmond, WA Posts: 92 Drives: '78 280Z, '09 370Z Rep Power: 13	I think its even from rear to front once you've been driving it for awhile. Looks great - I think ill purchase these for by black 370.. Ill post pix.