wheel Spacer question

RedBullRR · 05-25-2011, 10:09 AM

For the fronts, I would go with a Type 1 spacer for the rear Type 2. Its what I did it's what has been recommended over and over on here. No problems with mines no shaking nothing. Looks aggressive 20 front 25 rear.

cheshirecat · 05-25-2011, 10:10 AM

Quote:

Originally Posted by RedBullRR

For the fronts, I would go with a Type 1 spacer for the rear Type 2. Its what I did it's what has been recommended over and over on here. No problems with mines no shaking nothing. Looks aggressive 20 front 25 rear.

Agreed. Just pound the stock lugs out of the front. The rear will be fine with a slip-on spacer with built-in lugs.

I've always had my best luck with H&R.

czheng51 · 05-25-2011, 10:17 AM

Quote:

Originally Posted by RedBullRR

For the fronts, I would go with a Type 1 spacer for the rear Type 2. Its what I did it's what has been recommended over and over on here. No problems with mines no shaking nothing. Looks aggressive 20 front 25 rear.

may i ask what size rims you have and tire dimension to run 20mm front and 25mm rear without rubbing fender?

Fire · 05-25-2011, 02:33 PM

Edub I have the extended studs. If you use the bolt on hub(those that use the stock studs and then have another set of studs that the lugs go on) you need an area for the stock studs to extend into. If you look at the back of your rims at the hub area you may see void areas. Those are needed with the "bolt on" spacers. Most rims have void areas in the hub.

05-25-2011, 10:09 AM	#1 (permalink)
RedBullRR Enthusiast Member Join Date: Oct 2010 Location: Suffolk Posts: 336 Drives: 2010 370Z Red Rep Power: 16	For the fronts, I would go with a Type 1 spacer for the rear Type 2. Its what I did it's what has been recommended over and over on here. No problems with mines no shaking nothing. Looks aggressive 20 front 25 rear. __________________ 2010 Solid Red Z: Mods: Stillen G3 Intakes \| BC Coilovers \| H&R 20/25 Spacers \| Stillen Splitter \| Stillen LW Pullie TBI \| Red GTR Start \| LED Interior \| Kenwood Double Din

05-25-2011, 02:33 PM	#4 (permalink)
Fire A True Z Fanatic Join Date: Aug 2010 Location: WNY Posts: 4,117 Drives: 12 ZL1 6mt black Rep Power: 44	Edub I have the extended studs. If you use the bolt on hub(those that use the stock studs and then have another set of studs that the lugs go on) you need an area for the stock studs to extend into. If you look at the back of your rims at the hub area you may see void areas. Those are needed with the "bolt on" spacers. Most rims have void areas in the hub. __________________ 2012 Chevy Camaro ZL1 6MT coupe Back N' Black. 680hp

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Steering wheel spacer?	gozfast	Wheels & Tires	24	11-24-2016 09:47 AM
Another Wheel Spacer/Drop Question	370z owner	Brakes & Suspension	5	05-10-2011 05:38 PM
Specific wheel and spacer question.	Nele22	Wheels & Tires	6	03-05-2011 06:27 PM
H&R Trak+ 10mm Wheel Spacer Kit 5x114.3 DRS - $100 Shipped	RCZ	Parts for sale (Private Classifieds)	3	02-06-2011 10:11 PM
Wheel spacer question.	zZSoCalZz	Wheels & Tires	2	06-17-2010 03:11 PM