Metallic clicking sound from rear of car

ard978 · 03-12-2016, 02:03 PM

hey did anyone ever solve this?

i just installed rear 2 piece rotors and the emergency brake assembly gave me hell getting the rotors back on but now i have this clicking sound. clicks with rotation of the wheel on the driver side no matter how slow i roll.

there's also a separate click coming from the passenger side if i go from fwd to reverse or reverse to fwd.

have never touched the axle nut, only removed rotor/caliper. any thoughts?

juld0zer · 03-13-2016, 03:45 PM

Yep, i posted up a thread about it. You need a castellated nut to replace the inadequate Nissan design. Easiest suitable replacement is the Kawasaki axle nuts but you need some thick washers to make up the gap.

Since you have two piece rotors i'd check the fasteners for the discs, check surface of the inside of the hat where the handbrake shoes contact. First noise sounds contact related. Second noise sounds like the loose axle nut

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
clicking sound at low speed?	Pharmacist	Nissan 370Z General Discussions	21	06-02-2014 07:36 PM
Clicking from the dash???	wh1te370z	Exterior & Interior	15	09-06-2013 02:52 PM
When I floor the car, I hear a clicking sound	shesha	Exterior & Interior	19	06-21-2012 05:36 PM
clicking sound when pressing brake pedal = brake booster problem?	doubleG370Z	Brakes & Suspension	1	08-30-2010 06:49 PM
base model, no rear sound?	Mike	Audio & Video	16	07-03-2009 09:55 PM

03-12-2016, 02:03 PM	#1 (permalink)
ard978 Base Member Join Date: Mar 2012 Location: Charlotte Posts: 5 Drives: 2013 370Z Rep Power: 15	hey did anyone ever solve this? i just installed rear 2 piece rotors and the emergency brake assembly gave me hell getting the rotors back on but now i have this clicking sound. clicks with rotation of the wheel on the driver side no matter how slow i roll. there's also a separate click coming from the passenger side if i go from fwd to reverse or reverse to fwd. have never touched the axle nut, only removed rotor/caliper. any thoughts?

03-13-2016, 03:45 PM	#2 (permalink)
juld0zer Enthusiast Member Join Date: Nov 2012 Location: Sydney Posts: 428 Drives: 11 Nissan 370Z MB M6 Rep Power: 140	Yep, i posted up a thread about it. You need a castellated nut to replace the inadequate Nissan design. Easiest suitable replacement is the Kawasaki axle nuts but you need some thick washers to make up the gap. Since you have two piece rotors i'd check the fasteners for the discs, check surface of the inside of the hat where the handbrake shoes contact. First noise sounds contact related. Second noise sounds like the loose axle nut