Nissan 370Z Forum

Nissan 370Z Forum (http://www.the370z.com/)
-   Brakes & Suspension (http://www.the370z.com/brakes-suspension/)
-   -   Rear lower brace (http://www.the370z.com/brakes-suspension/32838-rear-lower-brace.html)

lazer_Z 03-24-2011 11:32 AM

bump! next batch going to powder coater mid next week... who wants one?!?!

lazer_Z 03-24-2011 01:14 PM

3 Attachment(s)
Quote:

Originally Posted by 370Z JT (Post 995820)
At the level of the exhaust maybe 10 feet away

as far as the pic here it is, just gives you the idea that you cant see the bar from behind/side of car.

Mike 03-24-2011 08:46 PM

1 Attachment(s)
here is what it looks like powdercoated in its final state:

KaienZ34 03-24-2011 09:39 PM

looking good

lazer_Z 03-25-2011 06:49 AM

thanks mike!

lazer_Z 03-30-2011 12:25 PM

It's Wed! Who wants in on the next batch?!?!?

370Z JT 03-30-2011 12:49 PM

Were you able to confirm installing this bar will throw of the rear alignment?

cheshirecat 03-30-2011 01:23 PM

Got mine- great product, great shipping. Going to get it installed when my swift springs are put in.

lazer_Z 03-30-2011 02:11 PM

Quote:

Originally Posted by 370Z JT (Post 1021236)
Were you able to confirm installing this bar will throw of the rear alignment?

I would SUGGEST getting an alignment, but as I did mine, if you dont lift the car off the ground it can be done without impacting the toe much. When I lifted my car I got it higher because I had to get under it to take pics and such, when I did this, my driver rear was off the ground and passenger rear was not. the driver rear needed adjustment and the passenger rear did not move at all. I would suggest getting one just to make sure, but if you are very careful it is not an absolute necessity. I do get an alignment about every 6 months as it is anyway though.


Chesire-Glad you got it! and im looking forward to pics of your car on swift springs and with the brace!

chops 03-30-2011 05:35 PM

im gonna have to hold off on this...one of my other cars just had a fender bender :\

heres to hoping you have more runs!


All times are GMT -5. The time now is 09:38 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2026, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2