Stance GR+ for 370z Bought from THM Making Thump Noise!!!

DennisZ · 02-07-2011, 09:26 PM

Hey Guys,

So i recently purchased a set of Stance GR+ OEM Type coilovers from THMMotorsports, installed them this weekend, and the driver rear is now making a thumping noise whenever i make a left or right turn, or go over a good size bump on the driver side...

Anyone else have this problem? Any fixes? Does Stance offer a warranty? THM, Do you mind chiming in?

odie99 · 02-07-2011, 09:28 PM

Check to make sure all of your bolts are correctly torqued.

DennisZ · 02-07-2011, 09:31 PM

Quote:

Originally Posted by odie99

Check to make sure all of your bolts are correctly torqued.

i am 100% positive they are torqued and tight correctly.

Red__Zed · 02-07-2011, 09:55 PM

give THM a call, they should be able to help out.

weiboy718 · 02-07-2011, 10:03 PM

Quote:

Originally Posted by DennisZ

Hey Guys,

So i recently purchased a set of Stance GR+ OEM Type coilovers from THMMotorsports, installed them this weekend, and the driver rear is now making a thumping noise whenever i make a left or right turn, or go over a good size bump on the driver side...

Anyone else have this problem? Any fixes? Does Stance offer a warranty? THM, Do you mind chiming in?

haha,i think i have a very good idea why it's thumping!

did you remove the rubber cone shape in the rear spring mount? if so, that is why it's thumping. you are suppose to install the Stance spring mount onto the rubber cone shape in the rear. hope this helps!

DennisZ · 02-07-2011, 10:11 PM

Quote:

Originally Posted by weiboy718

haha,i think i have a very good idea why it's thumping!

did you remove the rubber cone shape in the rear spring mount? if so, that is why it's thumping. you are suppose to install the Stance spring mount onto the rubber cone shape in the rear. hope this helps!

The rubber mount is on the bottom of the spring. We made sure to put it on there. Thanks for the suggestion though.

I already sent THM, and Stance an email. Hope to hear back from them soon.

weiboy718 · 02-07-2011, 10:14 PM

Quote:

Originally Posted by DennisZ

The rubber mount is on the bottom of the spring. We made sure to put it on there. Thanks for the suggestion though.

I already sent THM, and Stance an email. Hope to hear back from them soon.

i'm talking about the cone shape on top. both top and bottom of the spring suppose to have the factory rubber on there. just tell me this, did you remove the cone shape rubber that's on top?

or better off, do you have any pic's of your install? i can tell you right now if it's correct or not.

DennisZ · 02-07-2011, 10:17 PM

we did not remove the rubber cone at the top.

And it is still there, we put the adjuster thing for the spring right under it. and then the spring and then a rubber piece under the spring.

weiboy718 · 02-07-2011, 10:22 PM

Quote:

Originally Posted by DennisZ

we did not remove the rubber cone at the top.

And it is still there, we put the adjuster thing for the spring right under it. and then the spring and then a rubber piece under the spring.

yes, that is correct. sorry, that's all the tips i have.

i just installed the same exact setup for a local guy yesterday. so far so good with no complaints about any clunking noise whatsoever.

DennisZ · 02-07-2011, 10:24 PM

Quote:

Originally Posted by weiboy718

yes, that is correct. sorry, that's all the tips i have.

i just installed the same exact setup for a local guy yesterday. so far so good with no complaints about any clunking noise whatsoever.

Thanks alot man. I think it might have to do with the preload of the spring? Just read a thread on here and a member is saying his spring wasnt compressed enough so it cause a thumping noise.

How did you set up the spring and the strut? Because when i installed it, i didnt even adjust the height because im not sure how to do it....

weiboy718 · 02-07-2011, 10:28 PM

Quote:

Originally Posted by DennisZ

Thanks alot man. I think it might have to do with the preload of the spring? Just read a thread on here and a member is saying his spring wasnt compressed enough so it cause a thumping noise.

How did you set up the spring and the strut? Because when i installed it, i didnt even adjust the height because im not sure how to do it....

that can possibly be it!
i preloaded the rear spring closer to the end about 8 threads left. i unscrewed the shock cap and turned it in about 10 turns.

SPOHN · 02-08-2011, 07:33 AM

I thought you had to remove the rubber cone shaped thing when installing the rear with coilovers?

weiboy718 · 02-08-2011, 08:32 AM

Quote:

Originally Posted by SPOHN

I thought you had to remove the rubber cone shaped thing when installing the rear with coilovers?

not with these newer style cone shape spring mount. It's designed to install onto the existing factory rubber cone. By doing that should eliminate all the clunking noise but the op's problem has to be something different.

SPOHN · 02-08-2011, 09:01 AM

Ok. I'm going to be installing my BC's this weekend. I hope they come in.

weiboy718 · 02-08-2011, 09:16 AM

Quote:

Originally Posted by SPOHN

Ok. I'm going to be installing my BC's this weekend. I hope they come in.

NIce!

The BC setup requires you to remove the stock rubber cone

02-07-2011, 09:26 PM	#1 (permalink)
DennisZ Base Member Join Date: Jan 2011 Location: San Francisco Posts: 103 Drives: 370z - Accord Rep Power: 14	Stance GR+ for 370z Bought from THM Making Thump Noise!!! Hey Guys, So i recently purchased a set of Stance GR+ OEM Type coilovers from THMMotorsports, installed them this weekend, and the driver rear is now making a thumping noise whenever i make a left or right turn, or go over a good size bump on the driver side... Anyone else have this problem? Any fixes? Does Stance offer a warranty? THM, Do you mind chiming in?

02-07-2011, 09:28 PM	#2 (permalink)
odie99 Base Member Join Date: Dec 2010 Location: Earth Posts: 89 Drives: flip flops Rep Power: 14	Check to make sure all of your bolts are correctly torqued. __________________

02-08-2011, 07:33 AM	#12 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 45 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	I thought you had to remove the rubber cone shaped thing when installing the rear with coilovers? __________________

02-08-2011, 09:01 AM	#14 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 45 Posts: 14,844 Drives: Waiting on next Z Rep Power: 221	Ok. I'm going to be installing my BC's this weekend. I hope they come in. __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
370z making a little extran noise in first gear.	AARC51	Nissan 370Z General Discussions	20	02-01-2012 06:56 AM
6MT guys, minor clutch pedal thump..	pty370z	Engine & Drivetrain	21	12-25-2009 08:36 PM
Throw back bearings making NOISE AGAIN	Carbon_z	Engine & Drivetrain	23	10-22-2009 05:06 PM
Help...The car is making a wierd noise	armensti	Nissan 370Z General Discussions	13	07-13-2009 08:15 PM

02-07-2011, 09:55 PM	#4 (permalink)
Red__Zed A True Z Fanatic Join Date: Jul 2010 Location: window seat Posts: 28,940 Drives: Mostly on two wheels Rep Power: 119	give THM a call, they should be able to help out.

02-07-2011, 10:17 PM	#8 (permalink)
DennisZ Base Member Join Date: Jan 2011 Location: San Francisco Posts: 103 Drives: 370z - Accord Rep Power: 14	we did not remove the rubber cone at the top. And it is still there, we put the adjuster thing for the spring right under it. and then the spring and then a rubber piece under the spring.