12-17-2010, 02:17 PM
|
#4 (permalink)
|
|
Track Member
Join Date: Mar 2009
Location: Chicagoland
Posts: 748
Drives: 09 Nissan 370Z sold
Rep Power: 19
|
Quote:
Originally Posted by ZPirate
BTW has Stillen now added urethane bushings or do you still have to purchase those separately? I added them after the fact, but I like them nonetheless. When I bought mine Stillen was selling them separately.
|
No bushings were included, so I'll have to use the stock ones or get urethane ones separately. Where did you get your bushings, from Stillen or somewhere else?
Quote:
Originally Posted by ZPirate
BTW I've finally gone to the softess setting on the rear sway bars. When I had it on full stiff I was setting off the VDC when I took a corner going fast. Now I can do the same thing without activating the VDC. I can't really feel any handling difference between the settings. The softess setting on the Stillen sway bars is still considerably stiffer than the stock rear sway bar.
|
Good to know, I will probably start with the softest settings all round. My main goal is to improve handling a bit for the occasional autoX, hopefully reduce some of the understeer.
__________________
Black Fangs // Black rear Valance // Berk CBE // COBB post MAF tubes // K&N drop in filters // Setrab Oil Cooler // Stillen Sway bars // Z1 SS brake lines // Stillen brake cooling kit // Harness bar //
|
|
|
Similar Threads
Threaded Mode
