GT-R Brakes

TMWS · 11-13-2010, 08:52 PM

Does anyone know if GT-R calipers and rotors directly bolt up to a 370Z with no modification?

Brazilbro · 11-13-2010, 10:28 PM

Im sure if they did there would be a DIY already

nogoodname · 11-13-2010, 10:38 PM

I seriously doubt they would bolt on just like that... you would for sure need custom brackets.

Mike · 11-14-2010, 11:18 AM

actually, I wouldn't be surprised if we used the same spindles as the GTR, or at least very closely related ones. They might, but they are way pricey. You would be much better off just buying a brembo kit for the 370.

TMWS · 11-15-2010, 02:05 AM

Quote:

Originally Posted by Mike

actually, I wouldn't be surprised if we used the same spindles as the GTR, or at least very closely related ones. They might, but they are way pricey. You would be much better off just buying a brembo kit for the 370.

3,500 for caliper, brakes, lines and pads with 7000kms on NAGTROC
as well that's 380mm front and back

so you think it would bolt right on

Mike · 11-15-2010, 08:34 AM

I think chances are good. Your best bet would be to call a shop that is familiar with both, like maybe Forged Performance.

Waiz · 11-15-2010, 11:07 AM

It's been done on a 350z, you just need to find the appropriate brackets for the 370z (if they are available) or have them made.

TMWS · 11-15-2010, 04:38 PM

Quote:

Originally Posted by Waizzz

It's been done on a 350z, you just need to find the appropriate brackets for the 370z (if they are available) or have them made.

Thx for the info
Was it a direct bolt on with the 350z or were brackets reqiured

Waiz · 11-15-2010, 05:52 PM

This should help:

Turn-Key GT-R Brembo BBK Kit For 350Z/370Z

AP - Chris_B · 11-16-2010, 01:14 PM

Quote:

Originally Posted by TMWS

Does anyone know if GT-R calipers and rotors directly bolt up to a 370Z with no modification?

No, they don't. The GT-R front caliper is a 3-bolt mount, not a typical 2-bolt mount. Besides, the GT-R has a lot more weight in the rear due to the transaxle being back there. GT-R brakes on a 370Z would have too much rear bias for sure. Also, the GT-R Brembos have 27% LESS piston area than the OE 370Z Sport/Akebono brakes and the GT-R uses a larger master cylinder (+13%). Sorry, but it's not apples to apples at all.

Mike · 11-16-2010, 02:58 PM

Good info!

11-13-2010, 08:52 PM	#1 (permalink)
TMWS Base Member Join Date: Sep 2010 Location: Toronto Posts: 20 Drives: 09 370Z Rep Power: 14	GT-R Brakes Does anyone know if GT-R calipers and rotors directly bolt up to a 370Z with no modification?

11-13-2010, 10:28 PM	#2 (permalink)
Brazilbro A True Z Fanatic Join Date: Mar 2009 Location: Indianapolis, IN Posts: 1,131 Drives: Juke/240Z Rep Power: 848	Im sure if they did there would be a DIY already __________________ Juke AWD/240Z SR20 08 Evo 10(Stage 2) SOLD Fastest Sport 6spd 370Z 11.8 @126.5SOLD

11-14-2010, 11:18 AM	#4 (permalink)
Mike The370Z.com Sponsor Join Date: Jun 2009 Location: Loganville, GA Posts: 5,944 Drives: 370z Rep Power: 2185	actually, I wouldn't be surprised if we used the same spindles as the GTR, or at least very closely related ones. They might, but they are way pricey. You would be much better off just buying a brembo kit for the 370. __________________ NISSAN: 75 280Z / 86 300ZX GLL /87 Sentra SE / 03 350Z / 23 Z Porsche: 93 968 / 23 Macan GTS / 93 968

11-15-2010, 08:34 AM	#6 (permalink)
Mike The370Z.com Sponsor Join Date: Jun 2009 Location: Loganville, GA Posts: 5,944 Drives: 370z Rep Power: 2185	I think chances are good. Your best bet would be to call a shop that is familiar with both, like maybe Forged Performance. __________________ NISSAN: 75 280Z / 86 300ZX GLL /87 Sentra SE / 03 350Z / 23 Z Porsche: 93 968 / 23 Macan GTS / 93 968

11-16-2010, 02:58 PM	#11 (permalink)
Mike The370Z.com Sponsor Join Date: Jun 2009 Location: Loganville, GA Posts: 5,944 Drives: 370z Rep Power: 2185	Good info! __________________ NISSAN: 75 280Z / 86 300ZX GLL /87 Sentra SE / 03 350Z / 23 Z Porsche: 93 968 / 23 Macan GTS / 93 968

11-13-2010, 10:38 PM	#3 (permalink)
nogoodname Lifetime Premium Join Date: Nov 2008 Location: Montreal Posts: 22,357 Drives: E46 M3 Rep Power: 1764	I seriously doubt they would bolt on just like that... you would for sure need custom brackets.

11-15-2010, 11:07 AM	#7 (permalink)
Waiz A True Z Fanatic Join Date: Apr 2010 Location: SoCal Posts: 9,262 Drives: Z33 & GE8 Rep Power: 459	It's been done on a 350z, you just need to find the appropriate brackets for the 370z (if they are available) or have them made.

11-15-2010, 05:52 PM	#9 (permalink)
Waiz A True Z Fanatic Join Date: Apr 2010 Location: SoCal Posts: 9,262 Drives: Z33 & GE8 Rep Power: 459	This should help: Turn-Key GT-R Brembo BBK Kit For 350Z/370Z

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
370Z Brakes?	RCZ	Brakes & Suspension	48	05-23-2013 08:00 PM
sport brakes painted akebono brakes	kensin0429	Exterior & Interior	6	08-23-2009 10:06 PM
Touring Brakes vs Base Brakes	hey32g	Brakes & Suspension	7	07-19-2009 11:55 AM
Brakes	SDWayne	Brakes & Suspension	7	06-17-2009 07:31 PM
Brakes FS	shumby	Suspension/Brakes	15	01-23-2009 12:26 PM