Swift springs review!!!!!

tjlazer · 11-05-2010, 03:45 PM

I think so, it's usually the rubber parts settling in the top hats, etc. Thats why you are supposed to wait a few weeks before you go get an alignment.

I'm sitting at 1" lower front and .75" lower in the rear right now... driver side is a tad higher too, but that might be a good thing as I weigh 225 lbs

Boost_lee · 11-05-2010, 04:22 PM

Ill post pics of mine soon. The drop settled a bit more. The h&rs give a raked stance, this offers a very slight raked look, but more even imo. That pesky stock wheel gap is no longer bugging me and I'm always happy to see my z's stance now

Osiris · 11-05-2010, 06:12 PM

i don't think i read it in this thread, but did anyone that has installed these springs need to use a camber kit? If so, just the rear?

christian370z · 11-05-2010, 10:14 PM

Quote:

Originally Posted by Osiris

i don't think i read it in this thread, but did anyone that has installed these springs need to use a camber kit? If so, just the rear?

I think some are running the camber bolts but I think that it is best to go for camber arms since these will be right on the limits of what the camber bolts can be adjusted to.

tjlazer · 11-05-2010, 06:23 PM

Quote:

Originally Posted by Boost_lee

Ill post pics of mine soon. The drop settled a bit more. The h&rs give a raked stance, this offers a very slight raked look, but more even imo. That pesky stock wheel gap is no longer bugging me and I'm always happy to see my z's stance now

Hey do me a favor and measure front and rears. Wheel well arch to ground.

Boost_lee · 11-07-2010, 11:28 PM

Quote:

Originally Posted by tjlazer

Hey do me a favor and measure front and rears. Wheel well arch to ground.

here ya go TJ

Fronts

Rears

Tape measure was lined up front of the center caps of each wheel

Osiris · 11-08-2010, 07:17 AM

Quote:

Originally Posted by Boost_lee

here ya go TJ

Tape measure was lined up front of the center caps of each wheel

This is WITH the springs installed? Still looks like a pretty sizable gap...can you take a pic showing the whole car?

Boost_lee · 11-08-2010, 12:18 PM

Yes that is with the springs, measured from the ground up to the center of the wheel arch.

If you are stock, can you measure your car? I'd like to see a comparison.

Pics of my car are in the members gallery, no time for a photoshoot, only cell phone pics

11-05-2010, 03:45 PM	#1 (permalink)
tjlazer A True Z Fanatic Join Date: Dec 2009 Location: Tacoma Age: 54 Posts: 2,497 Drives: Z34, R35 Rep Power: 21	I think so, it's usually the rubber parts settling in the top hats, etc. Thats why you are supposed to wait a few weeks before you go get an alignment. I'm sitting at 1" lower front and .75" lower in the rear right now... driver side is a tad higher too, but that might be a good thing as I weigh 225 lbs __________________ 2009 370Z Monterey Blue,Nismo Conversion,RE-11's, K&N Typhoon intakes,Blue Kickplates,Homelink,FI 18" CBE,ERZ HFCs,Hotchkis sways, Swift Spec-R, EVO-R Highwing, UPREV Last edited by tjlazer; 11-05-2010 at 03:50 PM.

11-05-2010, 06:12 PM	#3 (permalink)
Osiris A True Z Fanatic Join Date: Mar 2009 Location: http://www.cfzclub.com/ Posts: 1,524 Drives: Angry Rep Power: 21	i don't think i read it in this thread, but did anyone that has installed these springs need to use a camber kit? If so, just the rear? __________________ ^^^^^^^^^Like our Facebook!^^^^^^^^^

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Swift Springs-- Nismo Review!!	JJ-NISMO	Brakes & Suspension	39	07-29-2014 07:59 AM
[WTB] Swift Springs	Beastmode	Parts for sale (Private Classifieds)	1	09-13-2011 04:46 PM
BC ERs with Swift Springs and RA Valving REVIEW / (Picture Heavy)	Mozen	Brakes & Suspension	31	05-24-2011 10:46 AM
WTB: Swift or H&R Springs	Mr&Mrs	Wanted	5	04-26-2011 10:51 PM
Swift Springs	Justin1686	North East Region	10	02-24-2011 06:58 PM

11-05-2010, 04:22 PM	#2 (permalink)
Boost_lee A True Z Fanatic Join Date: Feb 2009 Location: SATX Posts: 2,813 Drives: 09 370Z TT 6MT Rep Power: 31	Ill post pics of mine soon. The drop settled a bit more. The h&rs give a raked stance, this offers a very slight raked look, but more even imo. That pesky stock wheel gap is no longer bugging me and I'm always happy to see my z's stance now

11-08-2010, 12:18 PM	#8 (permalink)
Boost_lee A True Z Fanatic Join Date: Feb 2009 Location: SATX Posts: 2,813 Drives: 09 370Z TT 6MT Rep Power: 31	Yes that is with the springs, measured from the ground up to the center of the wheel arch. If you are stock, can you measure your car? I'd like to see a comparison. Pics of my car are in the members gallery, no time for a photoshoot, only cell phone pics