Swift springs review!!!!!

Zipper 104 · 10-24-2014, 07:37 PM

Quote:

Originally Posted by KaienZ34

Not two sets, one pair of rear camber arms SPL Titanium Rear Camber Links (370Z / G37) and one pair of front upper control arms SPL Front Upper Control Arms (370Z / G37) and rear toe bolts SPC Rear Camber Cam Bolts (370Z / G37)

You might not Need all of these, at least get the rear camber arms and toe bolts...Brand(s) of your choice of course.

Oh, OK.
I didn't think I'd need two pairs/sets until it came up earlier in the thread.
My plan is to go with the SPL camber arms and toe bolts and pass on the front upper control arms unless it turns out I need them.

Thanks.

104

Brad370 · 10-25-2014, 03:35 PM

Did anyone install the Swift Springs thrust sheets from their website (Swift Springs USA)? Has anyone had squeaky springs after the install?

I'm about to pull the trigger on the Swifts, H&R spacers, and SPC rear camber/toe kit. I just want to make sure once I get it all in there that it will be quiet. Right now I get a bit of creaking from my Nismo springs.

KamiSpeed · 10-27-2014, 11:08 AM

Quote:

Originally Posted by Brad370

Did anyone install the Swift Springs thrust sheets from their website (Swift Springs USA)? Has anyone had squeaky springs after the install?

I'm about to pull the trigger on the Swifts, H&R spacers, and SPC rear camber/toe kit. I just want to make sure once I get it all in there that it will be quiet. Right now I get a bit of creaking from my Nismo springs.

The Swift thrust sheet only work with coilover springs. With inner diameters of 60|65|70mm. They will not work with the Lowering springs.

Shoot me a PM and I can help you with all those items, no problem.

jsutton2 · 10-28-2014, 02:26 PM

Wen't back to the shop and they added some wire wrap on the bottom of both front springs, cleaned up the perches, and added lithium grease to places on the perch as well. No noise after that!!

I hope it lasts...

They said there was already rubber on the top, so they didn't add anymore.

Got a re-alignment while I was there too.

Zipper 104 · 10-30-2014, 02:41 AM

I've been looking all over to find 25mm wheel spacers, specifically H&R spacers and want to use their DRS style ones. (replacement stud type)
I can find 20mm DRS spacers, but any 25mm spacers I find are the bolt on type. (equivalent to H&R's DRM ones)
Are all the folks running 25mm spacers running bolt-ons?

Thanks

104

KamiSpeed · 10-30-2014, 10:37 AM

Quote:

Originally Posted by Zipper 104

I've been looking all over to find 25mm wheel spacers, specifically H&R spacers and want to use their DRS style ones. (replacement stud type)
I can find 20mm DRS spacers, but any 25mm spacers I find are the bolt on type. (equivalent to H&R's DRM ones)
Are all the folks running 25mm spacers running bolt-ons?

Thanks

104

Looking around it doesnt look like you can get a "drs" style spacer for the 370z. Only 370z guys I have seen with 25mm are bolt ons.

They make them for some other cars though, weird.

Fusionr · 10-31-2014, 06:23 AM

Quote:

Originally Posted by Zipper 104

I've been looking all over to find 25mm wheel spacers, specifically H&R spacers and want to use their DRS style ones. (replacement stud type)
I can find 20mm DRS spacers, but any 25mm spacers I find are the bolt on type. (equivalent to H&R's DRM ones)
Are all the folks running 25mm spacers running bolt-ons?

Thanks

104

I am running 20/25mm (F/R) H&R DRMs. I think the DRS only goes up to 20mm. I haven't had any issues with them for the year or two I have had them installed.

10-25-2014, 03:35 PM	#2 (permalink)
Brad370 Base Member Join Date: Aug 2011 Location: online Posts: 102 Drives: car Rep Power: 15	Thrust Sheets Did anyone install the Swift Springs thrust sheets from their website (Swift Springs USA)? Has anyone had squeaky springs after the install? I'm about to pull the trigger on the Swifts, H&R spacers, and SPC rear camber/toe kit. I just want to make sure once I get it all in there that it will be quiet. Right now I get a bit of creaking from my Nismo springs.

10-28-2014, 02:26 PM	#4 (permalink)
jsutton2 Base Member Join Date: Jul 2014 Location: Austin Posts: 239 Drives: 2010 370Z Sport Rep Power: 12	Wen't back to the shop and they added some wire wrap on the bottom of both front springs, cleaned up the perches, and added lithium grease to places on the perch as well. No noise after that!! I hope it lasts... They said there was already rubber on the top, so they didn't add anymore. Got a re-alignment while I was there too. __________________ 2010 Brilliant Silver 370z Sport - 08/01/2014 - And so it begins... Last edited by jsutton2; 10-28-2014 at 02:26 PM. Reason: spelling...

10-30-2014, 02:41 AM	#5 (permalink)
Zipper 104 Enthusiast Member Join Date: Aug 2014 Location: Canada's Wet Coast Posts: 480 Drives: '13 PW/Frost/Spt/AT Rep Power: 11	Wheel spacers I've been looking all over to find 25mm wheel spacers, specifically H&R spacers and want to use their DRS style ones. (replacement stud type) I can find 20mm DRS spacers, but any 25mm spacers I find are the bolt on type. (equivalent to H&R's DRM ones) Are all the folks running 25mm spacers running bolt-ons? Thanks 104

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Swift Springs-- Nismo Review!!	JJ-NISMO	Brakes & Suspension	39	07-29-2014 07:59 AM
[WTB] Swift Springs	Beastmode	Parts for sale (Private Classifieds)	1	09-13-2011 04:46 PM
BC ERs with Swift Springs and RA Valving REVIEW / (Picture Heavy)	Mozen	Brakes & Suspension	31	05-24-2011 10:46 AM
WTB: Swift or H&R Springs	Mr&Mrs	Wanted	5	04-26-2011 10:51 PM
Swift Springs	Justin1686	North East Region	10	02-24-2011 06:58 PM