Swift springs review!!!!!

KamiSpeed · 09-12-2011, 02:31 PM

Quote:

Originally Posted by Amuse370z

Is a drop like this (perfect imo) do-able with swifts?

definitely looks doable with swifts... might go a little lower even

Amuse370z · 09-12-2011, 09:49 PM

Quote:

Originally Posted by KamiSpeed

definitely looks doable with swifts... might go a little lower even

I saw more pics and I hope the swifts go lower, I plan to bring my car out to car shows and this is just not low enough:

KingZee · 09-23-2011, 01:40 PM

Quote:

Originally Posted by Amuse370z

Is a drop like this (perfect imo) do-able with swifts?

Phelan's car was at Amp when I installed my Swifts and I can definitely say that the Swift drop is lower than that...quiet a bit lower.

...On another note, my springs are still loud as hell, I have to give Swift a call already. (yes, rubbers are installed)

AlphaSnacks · 09-12-2011, 08:29 AM

That red car looks almost like stock drop, imo.

Amuse370z · 09-12-2011, 08:32 AM

The red car uses coilovers but the drop is not big at all, its similar to the swift springs so I was wondering if those with it can confirm whether the drop will look similar to that.

Yes, the body kit does make the actual car lower too

Alchemy · 09-12-2011, 09:03 AM

Here is my Z on swifts. This pic was just after installation. They def settled a bit more after I put some miles on it. IMO Swifts give it the perfect drop and the performance is amazing. Dont delay, just pull the trigger!!

edub370 · 09-12-2011, 09:09 AM

anyone..? thoughts on this mystery rattle... still havent tracked it down

christian370z · 09-13-2011, 01:56 AM

^That's Phelan's car, such a sweet ride! I shot a few pictures of it a little while back, the Swifts will drop the car a bit lower than his current ride height:

KamiSpeed · 09-13-2011, 12:41 PM

thats the Spec-R drop, look there's less of a wheel gap

Fastech · 09-14-2011, 12:53 PM

Just installed mine and drove on them for the first time. I'm amazed at the ride! A friend rode with me and had no idea I had just done springs, and said out of the blue "wow, this thing really rides great!" I'm very impressed...

RedZed34 · 09-22-2011, 08:58 PM

hey guys, I've had my swift springs installed for a couple months now but I've noticed that they've settled in quite a bit. (The front in particular. The back drop is perfect tho.) Is anyone else experiencing this?

Its almost to the point now where I'm considering other suspension options because the drop is just too low for normal street driving.

I'll post some pics tomorrow...

Alchemy · 09-22-2011, 09:18 PM

Quote:

Originally Posted by RedZed34

hey guys, I've had my swift springs installed for a couple months now but I've noticed that they've settled in quite a bit. (The front in particular. The back drop is perfect tho.) Is anyone else experiencing this?

Its almost to the point now where I'm considering other suspension options because the drop is just too low for normal street driving.

I'll post some pics tomorrow...

Bottoming out is half the fun

KamiSpeed · 09-23-2011, 09:42 AM

Quote:

Originally Posted by RedZed34

hey guys, I've had my swift springs installed for a couple months now but I've noticed that they've settled in quite a bit. (The front in particular. The back drop is perfect tho.) Is anyone else experiencing this?

Its almost to the point now where I'm considering other suspension options because the drop is just too low for normal street driving.

I'll post some pics tomorrow...

post some pictures, if it's any lower than it should be I send them to Swift see if there's a problem.

RedZed34 · 09-23-2011, 11:31 AM

Quote:

Originally Posted by KamiSpeed

post some pictures, if it's any lower than it should be I send them to Swift see if there's a problem.

Here are some pics of the front. sorry for the low quality. I didnt snap any pics of the back, but the back doesnt concern me because the drop looks fine... but let me know what you guys think? Its sitting pretty low in my opinion.

P.S. They didnt appear this low right after installation. They looked like everyone elses... but they just progressively settled in to what you see here.

Alchemy · 09-23-2011, 11:41 AM

^Looks pretty much just like my drop. If its lower its than mine its only by a cvnt hair. Here is a pic of mine, its from kinda far away but you can get an idea of how low my front is.

09-12-2011, 09:03 AM	#6 (permalink)
Alchemy A True Z Fanatic Join Date: Jan 2009 Location: Jersey Age: 45 Posts: 4,855 Drives: to acquire tickets Rep Power: 3525	Here is my Z on swifts. This pic was just after installation. They def settled a bit more after I put some miles on it. IMO Swifts give it the perfect drop and the performance is amazing. Dont delay, just pull the trigger!! ortiz73ca likes this. __________________ Ryan 314WHP \| 260LB-FT \| STILLEN \| KONI \| SWIFT \| STOPTECH \| Z1 \| PROJECT MU \| CNT \| UPREV \| FORGESTAR \| BRIDGESTONE \| PWJDM \| ENEOS \| MOTUL

09-12-2011, 09:09 AM	#7 (permalink)
edub370 A True Z Fanatic Join Date: May 2011 Location: KCMO Posts: 3,458 Drives: 09 370z S/T 6MT Rep Power: 21	anyone..? thoughts on this mystery rattle... still havent tracked it down __________________ 09 370Z ST 6MT//Injen CAI//Greddy CBE//TP//TSW's//Swifts//Stillen lip//Whiteline sways 326whp/268tq

09-13-2011, 01:56 AM	#8 (permalink)
christian370z A True Z Fanatic Join Date: Jul 2010 Location: Newport Beach Posts: 3,900 Drives: 2010 370Z/Saab 900se Rep Power: 433	^That's Phelan's car, such a sweet ride! I shot a few pictures of it a little while back, the Swifts will drop the car a bit lower than his current ride height: __________________ -320whp / 259wftlbs- SP Rays -- RE-11s -- SpecialtyZ Tune -- Swift Springs -- Stillen 25R Oil Cooler -- Stillen G3 Intakes -- Berk HFCs -- F.I. 12" CBE -- Stillen Sway Bars -- Es14 Spring -- INGS+1 lip -- CF Spoiler -- GTR Start Button -- VLED Parking Lights -- PWJDM V2 shift knob

09-13-2011, 12:41 PM	#9 (permalink)
KamiSpeed A True Z Fanatic Join Date: Feb 2011 Location: Orlando, FL Posts: 5,888 Drives: 09 370z Rep Power: 26	thats the Spec-R drop, look there's less of a wheel gap __________________ KAMISPEED \| SHOP 370Z PERFORMANCE PARTS & MODS \| SUPPORT@KAMISPEED.COM KAMI SPEED REVIEWS \| FINANCE YOUR PARTS WITH US \| MILITARY & FIRST RESPONDERS PRE-ORDER DEPOSIT PROGRAM \| HKS MASTER SELLER

09-14-2011, 12:53 PM	#10 (permalink)
Fastech Base Member Join Date: Aug 2011 Location: Chattanooga Posts: 27 Drives: 09 370Z Sport PG MT6 Rep Power: 14	Just installed mine and drove on them for the first time. I'm amazed at the ride! A friend rode with me and had no idea I had just done springs, and said out of the blue "wow, this thing really rides great!" I'm very impressed... __________________ Brian Flanagan 09 Base/Sport 6MT Future SCCA/NASA Weapon!

09-12-2011, 08:29 AM	#4 (permalink)
AlphaSnacks A True Z Fanatic Join Date: Jan 2010 Location: Windermere, FL Posts: 1,618 Drives: '13 XKR-S, '10 370Z Rep Power: 19	That red car looks almost like stock drop, imo.

09-12-2011, 08:32 AM	#5 (permalink)
Amuse370z A True Z Fanatic Join Date: Jan 2011 Location: Toronto Posts: 1,170 Drives: '13 PW Fairlady Z Rep Power: 17	The red car uses coilovers but the drop is not big at all, its similar to the swift springs so I was wondering if those with it can confirm whether the drop will look similar to that. Yes, the body kit does make the actual car lower too

09-22-2011, 08:58 PM	#11 (permalink)
RedZed34 Base Member Join Date: Oct 2009 Location: Connecticut Posts: 155 Drives: 09 370Z SR Sport Pkg Rep Power: 16	hey guys, I've had my swift springs installed for a couple months now but I've noticed that they've settled in quite a bit. (The front in particular. The back drop is perfect tho.) Is anyone else experiencing this? Its almost to the point now where I'm considering other suspension options because the drop is just too low for normal street driving. I'll post some pics tomorrow... __________________ Fast Intentions Catback Exhaust \| Blacked Out Rear Valance \| Illuminated Kick Panels \| 20% Tints \| Volk TE37SL Wheels 19x9.5" +22 / 19x10.5" +12 \| Bridgestone RE-11s \| Swift Spec-R Springs \| SPL Rear Camber Arms \| Stillen Splitter \| Tarmac Sports Side Blades

09-23-2011, 11:41 AM	#15 (permalink)
Alchemy A True Z Fanatic Join Date: Jan 2009 Location: Jersey Age: 45 Posts: 4,855 Drives: to acquire tickets Rep Power: 3525	^Looks pretty much just like my drop. If its lower its than mine its only by a cvnt hair. Here is a pic of mine, its from kinda far away but you can get an idea of how low my front is. __________________ Ryan 314WHP \| 260LB-FT \| STILLEN \| KONI \| SWIFT \| STOPTECH \| Z1 \| PROJECT MU \| CNT \| UPREV \| FORGESTAR \| BRIDGESTONE \| PWJDM \| ENEOS \| MOTUL

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Swift Springs-- Nismo Review!!	JJ-NISMO	Brakes & Suspension	39	07-29-2014 07:59 AM
[WTB] Swift Springs	Beastmode	Parts for sale (Private Classifieds)	1	09-13-2011 04:46 PM
BC ERs with Swift Springs and RA Valving REVIEW / (Picture Heavy)	Mozen	Brakes & Suspension	31	05-24-2011 10:46 AM
WTB: Swift or H&R Springs	Mr&Mrs	Wanted	5	04-26-2011 10:51 PM
Swift Springs	Justin1686	North East Region	10	02-24-2011 06:58 PM