Swift springs review!!!!!

abgyak · 04-12-2011, 07:15 AM

Any tracking no for me Bro Saku?

DIGItonium · 04-12-2011, 08:40 AM

Quote:

Originally Posted by ZForce

Digi...what tire did you go with and sizes?

This one took months of debating. Since I plan to push more power in a couple of months, the best combo with the Hankooks I could find were 275/35 and 305/30. Some owners already have this combination, so I'm hoping and praying this is going to work.

I'm jealous... there was barely any progress with my car (even took the day off to sort it out). My car was dropped off at a shop last Thurs. after completing the body repair to get the clear bra installation, but they never touched it for several days. So they rushed the job yesterday morning and the car arrived at my dealer after 9:30AM, but the tech was busy working on another car. An hour later he removed wheels and, I transported them to a wheel shop. They finished my wheels around 2:30PM, and the all that's done on my car when I left was 1 spring that needed to be taken out to put the rubber sleeve on. Hopefully I get the car back today... it has been nearly a month without the Z.

Imagine the labor cost of putting on new springs, brake rotors, pads, lines, fluid. Gotta get them overtime hours haha. [sigh]

KamiSpeed · 04-12-2011, 10:02 AM

Quote:

Originally Posted by ZForce

Here ya go Saku....haha

hey I don't think there is a necessary break-in time, I'd say like anything else just drive it around for a week or so to let things settle and then go for the alignment

KamiSpeed · 04-12-2011, 10:03 AM

Quote:

Originally Posted by abgyak

Any tracking no for me Bro Saku?

sorry none yet, should be shipping out today, I'll send you an email once its all ready

tsolin01 · 04-12-2011, 11:32 PM

Here are some pics with mine installed after a day so far. I'm liking the stance right now but might put a 10mm spacer up front in the future. These are the perfect drop for me, anything lower and I won't be able to drive anywhere lol

cheshirecat · 04-13-2011, 07:02 AM

The drop looks great- the front definitely needs to come out. I think you should add spacers to the front and rear to really flush them out.

birdmanx1 · 04-13-2011, 07:19 AM

Quote:

Originally Posted by tsolin01

Here are some pics with mine installed after a day so far. I'm liking the stance right now

WOW tsolin, that's looking very nice

this will look even better as the springs fully settle.

DIGItonium · 04-13-2011, 08:06 AM

Car came back from service after getting some work done. I was told that toe is good, but they couldn't get the camber and caster adjusted the way they wanted and recommended I come back with a camber kit. Initial impression from driving a few miles is that the ride quality is not degraded, and it feels stock. I haven't scraped anything going up and down the driveway. In fact, I used to scrape the exhaust cans every once in awhile with the stock springs and thinner tires (285/30). I need to double check steering range with the drop and fatter tires. The FI exhaust can is about 3" off the ground.

Below are previews of the current look... higher quality pictures after getting the headlights modded, lip installed, etc.

Before

Preview

Front Left

Front Gap (A few hours after settling in)

Rear Left

Rear Gap (A few hours after settling in)

Red__Zed · 04-13-2011, 09:47 AM

Dang, your ride is like perfect.

Mine showed up yesterday, won't be back in town to install til the weekend though.

tsolin01 · 04-13-2011, 09:55 AM

Quote:

Originally Posted by birdmanx1

WOW tsolin, that's looking very nice

this will look even better as the springs fully settle.

Quote:

Originally Posted by cheshirecat

The drop looks great- the front definitely needs to come out. I think you should add spacers to the front and rear to really flush them out.

Thanks guys.

I don't really want to mess with spacers so I'll probably just leave it be for awhile.

DIGItonium, ride looks good man. Glad you got your car back in one piece.

DIGItonium · 04-13-2011, 10:47 AM

Quote:

Originally Posted by tsolin01

DIGItonium, ride looks good man. Glad you got your car back in one piece.

Thanks! Are you looking into getting a camber kit? I had mine aligned the same day because the other party's insurance was covering it.

So far the adjusted rear camber is -2.6 deg for the left and -2.5 deg for the right. The front camber is -1.6 deg for the left and -1.5 deg for the right. I'm told the car is drivable, but it will eat tires if I don't get a camber kit.

tsolin01 · 04-13-2011, 11:15 AM

I'm planning to get aligned probably next week so we'll see. Right now it doesn't look like it has as much negative camber as yours but I'm hoping they can get it back into spec. I think if I can get in the -1 degree range, I'll be happy and probably won't get a camber kit lol

abgyak · 04-13-2011, 12:13 PM

Just to be on the save side im thinking of getting some front & rear camber kit for the swift spring i'll be installing once they arrived. Was wondering who's out there selling the SPC front & rear kit with a good offer?

bigdog1250 · 04-13-2011, 12:15 PM

My springs came in last night, YES, going to install them on saturday.

Ron · 04-13-2011, 10:51 PM

Quote:

Originally Posted by abgyak

Just to be on the save side im thinking of getting some front & rear camber kit for the swift spring i'll be installing once they arrived. Was wondering who's out there selling the SPC front & rear kit with a good offer?

THMotorsoports has them for 509 shipped. Other sellers have the fronts for 365 and rears for 180, aprox.

Edit: THM exclusive: SPC full camber kits available! Save your tires!

04-12-2011, 07:15 AM	#391 (permalink)
abgyak Enthusiast Member Join Date: Oct 2009 Location: Brunei Darussalam Posts: 378 Drives: 370z - 260z - 280zx Rep Power: 16	Any tracking no for me Bro Saku? __________________ Brunei Darussalam: Abode Of Peace

04-13-2011, 08:06 AM	#398 (permalink)
DIGItonium A True Z Fanatic Join Date: Jan 2009 Location: Kansas Posts: 3,800 Drives: 09 Z34-TT 6MT Rep Power: 43	Car came back from service after getting some work done. I was told that toe is good, but they couldn't get the camber and caster adjusted the way they wanted and recommended I come back with a camber kit. Initial impression from driving a few miles is that the ride quality is not degraded, and it feels stock. I haven't scraped anything going up and down the driveway. In fact, I used to scrape the exhaust cans every once in awhile with the stock springs and thinner tires (285/30). I need to double check steering range with the drop and fatter tires. The FI exhaust can is about 3" off the ground. Below are previews of the current look... higher quality pictures after getting the headlights modded, lip installed, etc. Before Preview Front Left Front Gap (A few hours after settling in) Rear Left Rear Gap (A few hours after settling in) __________________

04-13-2011, 11:15 AM	#402 (permalink)
tsolin01 Track Member Join Date: Feb 2010 Location: Dallas, TX Posts: 657 Drives: 2010 370Z Rep Power: 17	I'm planning to get aligned probably next week so we'll see. Right now it doesn't look like it has as much negative camber as yours but I'm hoping they can get it back into spec. I think if I can get in the -1 degree range, I'll be happy and probably won't get a camber kit lol __________________ SOLD 12/30/2011 2010 370Z Coupe Monterey Blue 6MT/Touring/Sport/Nav F.I. CBE CF w/ 12" Res \| V1 \| SecondSkin \| Stillen G3 \| EVO-R CF B-Pillars \| Volk GT-S Ti Gunmetal 19x9.5 +30 F, 19x10.5 +8 R \| Swift Spec-R Springs

04-13-2011, 12:13 PM	#403 (permalink)
abgyak Enthusiast Member Join Date: Oct 2009 Location: Brunei Darussalam Posts: 378 Drives: 370z - 260z - 280zx Rep Power: 16	Just to be on the save side im thinking of getting some front & rear camber kit for the swift spring i'll be installing once they arrived. Was wondering who's out there selling the SPC front & rear kit with a good offer? __________________ Brunei Darussalam: Abode Of Peace

04-13-2011, 12:15 PM	#404 (permalink)
bigdog1250 Track Member Join Date: Nov 2008 Location: San Francisco Posts: 846 Drives: 991.2 GT3 Rep Power: 18	My springs came in last night, YES, going to install them on saturday. __________________ 350z / 40th 370z / C6 Z06 / BMW M4 / V10 R8 / C7 Grand Spot / 997.1 GT3 / S2K / Camaro ZL1 / 718 GTS / 991.2 GT3

04-13-2011, 07:02 AM	#396 (permalink)
cheshirecat A True Z Fanatic Join Date: Jan 2009 Location: Florida Posts: 1,428 Drives: N54 135i Rep Power: 293	The drop looks great- the front definitely needs to come out. I think you should add spacers to the front and rear to really flush them out.

04-13-2011, 09:47 AM	#399 (permalink)
Red__Zed A True Z Fanatic Join Date: Jul 2010 Location: window seat Posts: 28,940 Drives: Mostly on two wheels Rep Power: 121	Dang, your ride is like perfect. Mine showed up yesterday, won't be back in town to install til the weekend though.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Swift Springs-- Nismo Review!!	JJ-NISMO	Brakes & Suspension	39	07-29-2014 07:59 AM
[WTB] Swift Springs	Beastmode	Parts for sale (Private Classifieds)	1	09-13-2011 04:46 PM
BC ERs with Swift Springs and RA Valving REVIEW / (Picture Heavy)	Mozen	Brakes & Suspension	31	05-24-2011 10:46 AM
WTB: Swift or H&R Springs	Mr&Mrs	Wanted	5	04-26-2011 10:51 PM
Swift Springs	Justin1686	North East Region	10	02-24-2011 06:58 PM