Removal of front struts

SPOHN · 08-23-2010, 03:17 PM

So far as the OP, I wouldn't push down on the A-arm to remove the strut (even though he said it's not worth it). I did this the second time I changed out the strut and it ended up throwing off the SAI (steering axle inclination). To my understanding this can't be fixed other than replacing the upper strut mount and lower ball mount.

Those of you you who don't know what SAI is it's like caster, it provides directional stability. But it also reduces steering effort by reducing the scrub radius. SAI is a built-in nonadjustable angle and is used with camber and the included angle to show bent spindles, struts and mislocated crossmembers. I didn't have the car much longer after this to see the effects on steering or tire wear. But as far as I could tell at the time I didn't fill nothing in the steering even though it was far off from the stock settings.

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY: Front Bumper Removal	DIGItonium	DIY Section (Do-It-Yourself)	98	10-19-2022 08:48 AM
FS: OEM springs and struts	Jordo!	Parts for sale (Private Classifieds)	4	09-28-2010 03:13 PM
REQUEST: Front Bumper Removal	Cyberium	DIY Section (Do-It-Yourself)	15	07-18-2010 01:43 PM
stock front struts	pgrmstr	Wanted	4	03-02-2010 08:23 AM
Front Mudguard Removal	blinkme323	Exterior & Interior	2	01-29-2010 02:39 AM

08-23-2010, 03:17 PM	#9 (permalink)
SPOHN A True Z Fanatic Join Date: Feb 2010 Location: Covington, GA Age: 46 Posts: 14,844 Drives: Waiting on next Z Rep Power: 222	So far as the OP, I wouldn't push down on the A-arm to remove the strut (even though he said it's not worth it). I did this the second time I changed out the strut and it ended up throwing off the SAI (steering axle inclination). To my understanding this can't be fixed other than replacing the upper strut mount and lower ball mount. Those of you you who don't know what SAI is it's like caster, it provides directional stability. But it also reduces steering effort by reducing the scrub radius. SAI is a built-in nonadjustable angle and is used with camber and the included angle to show bent spindles, struts and mislocated crossmembers. I didn't have the car much longer after this to see the effects on steering or tire wear. But as far as I could tell at the time I didn't fill nothing in the steering even though it was far off from the stock settings.