Best springs...

kevr6 · 06-12-2010, 10:31 PM

Quote:

Originally Posted by speedworks

^^^"h&r and neuspeed are the same company"

Where did you hear this?

H&R is a German company and Neuspeed springs are advertised as being made in Germany. I just knew that Neuspeed did not produce their own springs and couldn't remember since the last time I looked into it was in 1998.

BTW, They are not the same company.

tjlazer · 06-12-2010, 04:06 PM

I think you are wanting to go with a Linear spring on the 370Z. I am going to try RS*R Linear springs Ti2000 from the 350Z, they claim a .6" drop and Front Stiffness: 6.2kg/mm (345lb) Rear Stiffness: 7.5kg/mm (417lb) so hopefully they do well! I'll let you all know soon.

kenchan · 06-12-2010, 09:03 PM

yah, H&R oems to Neuspeed. the neuspeeds for the prelude was made by H&R at least.

tbonesteak · 06-13-2010, 04:43 PM

damn....maybe i'm off then. but they were some how affiliated for sure in the past. Like kenchan said, i remember back in the days when they were manufacturing each others' parts even if it was for a little while. Thanks for the clarification.

corner3garage · 06-14-2010, 12:33 PM

tanabe's and the eibachs will give you the most bang for the buck. Both companies have good quality as well

Rhett · 07-23-2010, 05:47 PM

Hi, guys!

This might be a silly question. But, I want to know which one is better between the Eibach pro kit and Tein s-tech. Please let me know that before ordering. ^^

06-12-2010, 04:06 PM	#2 (permalink)
tjlazer A True Z Fanatic Join Date: Dec 2009 Location: Tacoma Age: 54 Posts: 2,497 Drives: Z34, R35 Rep Power: 21	I think you are wanting to go with a Linear spring on the 370Z. I am going to try RS*R Linear springs Ti2000 from the 350Z, they claim a .6" drop and Front Stiffness: 6.2kg/mm (345lb) Rear Stiffness: 7.5kg/mm (417lb) so hopefully they do well! I'll let you all know soon. __________________ 2009 370Z Monterey Blue,Nismo Conversion,RE-11's, K&N Typhoon intakes,Blue Kickplates,Homelink,FI 18" CBE,ERZ HFCs,Hotchkis sways, Swift Spec-R, EVO-R Highwing, UPREV

06-14-2010, 12:33 PM	#5 (permalink)
corner3garage The370Z.com Sponsor Join Date: Oct 2009 Location: Laguna Hills, CA Posts: 9,879 Drives: 240sx, 350z, 370z Rep Power: 36	tanabe's and the eibachs will give you the most bang for the buck. Both companies have good quality as well __________________ Corner3motorsports.com

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
RS-R springs?	GTRFAN	Brakes & Suspension	74	03-08-2012 08:41 AM
H&R Springs Anyone ?	Zeester	Brakes & Suspension	88	09-30-2010 04:11 AM
Should i get springs or coilovers (help)	xbigb4ller69z	Brakes & Suspension	5	08-14-2010 01:14 PM
H&R Lowering Springs?	CBRich	Brakes & Suspension	8	03-01-2010 12:35 PM
h&r springs	discorpio	Brakes & Suspension	11	01-11-2010 04:06 PM

06-12-2010, 09:03 PM	#3 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141522	yah, H&R oems to Neuspeed. the neuspeeds for the prelude was made by H&R at least.

06-13-2010, 04:43 PM	#4 (permalink)
tbonesteak Track Member Join Date: Mar 2009 Location: Socal Posts: 914 Drives: MY09 MB 6MT Rep Power: 377	damn....maybe i'm off then. but they were some how affiliated for sure in the past. Like kenchan said, i remember back in the days when they were manufacturing each others' parts even if it was for a little while. Thanks for the clarification.

07-23-2010, 05:47 PM	#6 (permalink)
Rhett Base Member Join Date: Apr 2010 Location: Seattle, WA Posts: 51 Drives: 09 370z Touring SP M Rep Power: 17	Hi, guys! This might be a silly question. But, I want to know which one is better between the Eibach pro kit and Tein s-tech. Please let me know that before ordering. ^^