+ Toe Bolt Question +

ZForce · 05-10-2010, 02:05 AM

Red is for Toe and you should get the spec sheet from your alignment. Its too difficult to determind w/o knowing how much of a drop from stock to advise if you need the Toe bolt installed or not.

I know that 1.0'' drop will NOT require the Toe bolt and you will be able to adjust with the stock Toe bolt to keep within OEM spec.

I have heard of peeps installing the Toe bolt that comes with the SPC Rear Camber Kit and NOT hogging out the hole. But again it all depends on how much you are dropped and the readings from your alignment print out sheet.

As far as what benefits are gained from installing the SPC Toe bolt on a 1.0" drop when you really only need to keep the stock Toe bolt in....I really do not know. Funny thing is, my installer said this same thing just this afternoon, I will let you know after this Sat when I get a lot of my suspension mods installed. weeee!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
need help demon bolt	thegraylady	Engine & Drivetrain	11	09-16-2010 01:08 PM
Why is it always the LAST *@#$& BOLT!?!	Dembflyr	DIY Section (Do-It-Yourself)	13	04-23-2010 09:04 PM
Lug bolt covers	1013mm	Wheels & Tires	4	02-05-2010 09:07 PM
Bolt-ons = less restrictive, Better MPG???	spearfish25	Intake/Exhaust	21	07-28-2009 09:08 PM
Bolt pattern?	370ZINMO	Wheels & Tires	10	12-14-2008 09:13 PM

05-10-2010, 02:05 AM	#9 (permalink)
ZForce A True Z Fanatic Join Date: Jul 2009 Location: Roseville, CA Posts: 2,359 Drives: 09 370Z Tour + Sport Rep Power: 22	Red is for Toe and you should get the spec sheet from your alignment. Its too difficult to determind w/o knowing how much of a drop from stock to advise if you need the Toe bolt installed or not. I know that 1.0'' drop will NOT require the Toe bolt and you will be able to adjust with the stock Toe bolt to keep within OEM spec. I have heard of peeps installing the Toe bolt that comes with the SPC Rear Camber Kit and NOT hogging out the hole. But again it all depends on how much you are dropped and the readings from your alignment print out sheet. As far as what benefits are gained from installing the SPC Toe bolt on a 1.0" drop when you really only need to keep the stock Toe bolt in....I really do not know. Funny thing is, my installer said this same thing just this afternoon, I will let you know after this Sat when I get a lot of my suspension mods installed. weeee!