Brake/wheel clearance diagrams help

cv129

Wait....

The CZP diagram seems right, the bono front caliper extending 47.5mm past rotor hub (I measured it at just under 2 in)

The Wilwood graph is showing caliper only extends 1 inch/25.4mm past the rotor hub?

Or I’m reading it wrong...I can learn something new here either way...

__________________
Setrab | RE-71 | SPL | JRZ | Nismo | ARK | Whiteline | RacingBrake | CJM Oil Pan | Ti shield

Ghost116

That’s why I’m here lol. Is that 1”/25.4mm measurement from the hub? Seems like the hub would be a little further out then that.


Sent from my iPhone using Tapatalk

cv129

Seems we have the same interpretation and confusion lol. I’ll wait for experts and learn before I further stuff my foot in my mouth.

I even went to Wilwood site, ended up at the same part number and graph. Initially I thought Of possibility that it’s not even the right caliper/graph for the Z.

__________________
Setrab | RE-71 | SPL | JRZ | Nismo | ARK | Whiteline | RacingBrake | CJM Oil Pan | Ti shield

Ghost116

So my cousin (does suspension and chassis work for a race team) txt me back and said that apparently the wilwood is smaller in every way and will fit under more wheels then the bono for sure. I’m going to get him to explain the drawing to me this weekend lol. I’ll try to reiterate it in layman’s terms end of the week lol


Sent from my iPhone using Tapatalk

Jhill

Their diagram looks pretty straight forward to me and yea that would be them saying it only sticks out past 1”. Must be some very thin pads in those calipers then, also gonna look a little weird with the calipers tucked so far inboard.