Track Pad material help?!
Hello all,
Looking to see what i can do to solve my rotor-temp issues. I run Carbotech XP8 pads on all 4 corners of my 370z when @ the track. My tires are R888R track compounds. With the XP8, i can engage ABS at the bottom of the pedal. Also my rotor temperatures after a cool-down lap are about 700F. Question Would an upgrade to XP10 compound (higher temp) assist with LESS heat into the system over time? - OR: would the higher temp compound create more peak heat thereby raising the average rotor temp? :tiphat: |
Couple of things.
You need more brake cooling. Bigger hoses, run a couple of hoses. With the higher temps. You need pads that operate at those temps. |
What Rusty said ............
Is all about cooling ......... if you need to consider 3" cooling hoses fed from the front of the car. If you already have that, then look to fit a pair of 3" hoses |
So far I have been good with the Stillen brake duct system with xp10s up front and titanium braking plates. I'm considering a bigger hose as my speed is increasing with experience.
|
Pad material really won't make a difference for your case in how hot your rotors get. The more time you're on the gas, the faster you go, the hotter the brakes get. Two piece rotors are great because they are lighter (less mass) but cause higher temps because change in Temp=Energy/Mass. But generally lighter rotors are are better because you can always increase cooling to offset the heating effect as Rusty said above.
But if your rotors are surviving and your not getting fade I don't see an issue. But I and a number of others run XP10F and XP8R or even 12/10. |
Well I’m only group b (and just recently) with a 2013 so no stillen brake duct option. I use xp10/xp8 with zero brake issues (again still new) and also I’ve only been to leguna so mild weather vs buttonwillow or thunder hill but my last track day I had a really awesome instructor (raced formula fords and other stuff through his career) who had me focus much more on braking and smoother braking. I could see after my runs the brakes were not nearly as hot as my track day before but I’m still frustrated with the Harry’s app so I can’t say what was truly faster.
|
Getting Harry's set up was the worst experience in the world. I switched to RaceChrono and haven't looked back.
|
Quote:
|
Quote:
Here's with the stock overlay: https://youtu.be/mXkn6fDdwJQ Keep in mind the OBD bus on the e36 is slow, i think it's 5hz so the return can be laggy on the numbers. |
Quote:
|
I'm sure it will, I already had the GPS puck so there was no use not to use it :)
|
Quote:
|
I'm doing 10/8's with brake duct cooling on stock discs and its a a world of difference in confidence that my brakes will last a 30 minute session. I'd recommend a 12/10 only if you're running a really aggressive tire. If you get too aggressive on pads and not enough tire, you risk your abs going into ice mode.
|
Quote:
The more aggressive the pads, the more grip you need from the tires. |
Quote:
Sent from my SM-N910P using Tapatalk |
All times are GMT -5. The time now is 02:23 PM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2