Things they don't tell you about Coilovers

NorthStyle · 07-15-2016, 03:55 PM

Quote:

Originally Posted by Bshields22

Hey guys,

Coil-overs sound great on paper and when done RIGHT, lead to great results.

What are some of the things that don't get highlighted too much until you really begin to dive deep into the process:

Some things to start the conversation:

Additions to coil-overs: New control arms and such to maintain spec camber

Cornering balance and alignment

Cost of Installation usually

Overall comfort while not on track preferably a good setting that balance track and road use. i know there is a "softer than stock setting"

Ease of use to adjust settings between track and road use

Life span (mild track use)

Tire wear??

All i can think of right now. Maybe someone can share their comments on the above and/or provide additional topics that don't come to mind. Who knows, maybe i hit all of them on the head

Thanks fellas

If you've read around on here, just about every single topic you brought up has been discussed in detail. For example (I'm numbering them based on the order you asked):

1. Adjustable arms are highly recommended, even when using lowering springs. Are they necessary? That depends on how much you plan to lower, but if you're going to do it, do it right.

2. A corner balance isn't necessary unless you heavily track your car, then I'd say to get one done. An alignment should always be accomplished when changing suspension components.

3. Cost will vary from shop to shop. If you have the tools to do it yourself it's not difficult. I didn't, and paid $500 for my shop to install coilovers, front control arms, rear toe arms, rear camber arms, eccentric lockout, get it aligned and change my oil. They also routed my air lines from the trunk to the front suspension (cup kit).

4. Comfort is subjective. All of my cars for the past 10+ years have had coilovers so I'm used to them. The stock suspension on my Nismo left much to be desired in the realm of "comfort" so my coilovers were an upgrade in that area. This isn't always the case. My Lexus is stiffer, but still plenty comfortable to me and the wife.

Street and track settings are up to the individual so you will hear something different from every person. I set mine up depending on where I drive and adjust over time until I find the best setting that suits me.

5. Once I set the height I usually leave it. Adjusting the dampening is as simple as turning a knob.

6. Life span varies. My Fortune 500's on my Lexus are at approximately 30k miles and ride fine. But I don't track the car outside of an occasional drive on the Nurburgring. The Stance SS+ Pro (or whatever they're called now) have been on the Z for less than 500 miles so too new to comment.

7. Tire wear will depend on driving habits and getting a good alignment. Which goes back to #s 1 and 2.

A recommendation I've learned is to always ask if springs/spring rates are available and to speak with the company you're purchasing them from to get a recommendation based on what your intentions are. I always suggest purchasing Swift springs when available.

Hope this helps some.

Bshields22 · 07-15-2016, 04:20 PM

Quote:

Originally Posted by NorthStyle

If you've read around on here, just about every single topic you brought up has been discussed in detail. For example (I'm numbering them based on the order you asked):

1. Adjustable arms are highly recommended, even when using lowering springs. Are they necessary? That depends on how much you plan to lower, but if you're going to do it, do it right.

2. A corner balance isn't necessary unless you heavily track your car, then I'd say to get one done. An alignment should always be accomplished when changing suspension components.

3. Cost will vary from shop to shop. If you have the tools to do it yourself it's not difficult. I didn't, and paid $500 for my shop to install coilovers, front control arms, rear toe arms, rear camber arms, eccentric lockout, get it aligned and change my oil. They also routed my air lines from the trunk to the front suspension (cup kit).

4. Comfort is subjective. All of my cars for the past 10+ years have had coilovers so I'm used to them. The stock suspension on my Nismo left much to be desired in the realm of "comfort" so my coilovers were an upgrade in that area. This isn't always the case. My Lexus is stiffer, but still plenty comfortable to me and the wife.

Street and track settings are up to the individual so you will hear something different from every person. I set mine up depending on where I drive and adjust over time until I find the best setting that suits me.

5. Once I set the height I usually leave it. Adjusting the dampening is as simple as turning a knob.

6. Life span varies. My Fortune 500's on my Lexus are at approximately 30k miles and ride fine. But I don't track the car outside of an occasional drive on the Nurburgring. The Stance SS+ Pro (or whatever they're called now) have been on the Z for less than 500 miles so too new to comment.

7. Tire wear will depend on driving habits and getting a good alignment. Which goes back to #s 1 and 2.

A recommendation I've learned is to always ask if springs/spring rates are available and to speak with the company you're purchasing them from to get a recommendation based on what your intentions are. I always suggest purchasing Swift springs when available.

Hope this helps some.

Great information thank you sir! I wanted to start a new thread which summarizes everything. Fact from preference gets a bit jumbled when you bounce between a ton of threads

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] Aragosta Type S Coilovers, Koni Coilovers, Trans Cooler, Hotchkis Sways, Stillen HFC	dimsler	Parts for sale (Private Classifieds)	37	05-13-2014 10:34 AM
great info about coilovers vs springs..i may jus save up for coilovers instead	res0zsfa	Brakes & Suspension	15	09-09-2010 07:05 PM
What are these things?!!!	SophiaZ	Exterior & Interior	7	01-17-2010 02:11 AM
The little things	Philipp	Nissan 370Z General Discussions	17	08-19-2009 10:59 AM