Check my album. :tiphat:

hmm after some deliberation I think imma go with my original choice and thanks to jwmotoring's satisfaction policy I really have nothing to lose!! But I'm pretty sure I'll be happy with it!! Plz let me know when the 6k shipment comes in!!

got my 10k on saturday put them on as soon as the mailman dropped them off lol
i love the color of my lights thanks.

Just placed my order!! Can't wait til they come in

cool any pix?? btw how long did it take for your bulbs to come in??

Thanks for the order. Those will be shipping later today.

You're not too far from here. I would guess they will be there before the weekend.

Hi guys, question for JWM or others who have bought these bulbs..

Have any of you ran into the "flickering" issue that some people experienced with other brands..??

By flickering I mean, sometimes you turn off the lights, and when you turn them back on immediately, bulbs don't light up... Sometimes they needed to be switched off and on several times before they lit up again...

I ran into an issue like this with a different brand of bulbs and it ended up melting the harness on the right headlight.. Had to purchase a new harness..

People were recommending a japanese brand called RIGG (hard to get) and also Philips Ultinon bulbs (expensive)..

Appreciate the input...

Hey pty...I had a similar problem, however I didn't melt the harness. I don't think its a problem with the bulb, rather for me it was properly securing the bulb in slot, and making sure the pins were aligned and tight. Also, the main thing is to make sure the bulb pad is making proper contact with the bulb end. This ensures that there is no flickering or loose connection. I know when I first installed some bulbs, my bulb case was not properly secured around the bulb, and when I turned it on, it flickered and turned off, it took a couple tries to get it to work. So I went back in, and I unhooked the bulb pad, took out the bulb, then carefully put it back in, secured it and made sure the bulb pad was back on tight (you should feel some resistance when you turn it). It solved my problem.

Nothing like that has been reported to me.

I had it happen and in my case it was the bulbs.. Put the stock bulbs back in, problem solved.. No issues... Changed bulbs, problems... Stock bulbs again, no issues...

Thanks! I may order a set of 6K soon..

sweet can't wait!!

Before I tested these bulbs, I read all of the DIY threads on bulb replacements and noted the flickering problem. I cycled the lights several times to make sure we didn't have this issue before they were released.
Jhonathan, let me know if you can think of anything I can check out for you on this if needed.

hmm well def the bulbs then, ive had a good 6 months with my bulbs and no issues after what I corrected what I said before. :tup:

Jhonathan, If you get any sent back that had this problem with flickering, I'd be glad to see if I get the same issue with them.

Thanks Daemon.

I've sold a ton already with no issues so I don't see it happening.

I had that problem too once before, gotta make sure that bulbs all the way in and properly secured with the clips, harness needs the be on there tight and flush, just like it was said earlier. That's all it turned out to be.

JWMotoring Order placed!! Woot, Woot! can't wait. Although i had this question about lumens!

So the more lumens you have the brighter or more light the bulb projects??! Or if you get a good balance between 3k & 2k lumens the brighter your light is? Thanks

Thanks :tup: You're just up the interstate so you should have them really quick.

Oh yeah sorry I don't have any of the items you asked about in the notes. Maybe I should get some made.

Yeah usually this is the problem, and in most cases its how you put it in versus the bulb itself being bad. However, there are exceptions, especially if you buy the cheap bulbs online, from a company that is not well known.

Well we're not well known in the Z community, but I have high quality bulbs!

I dont doubt that, wasn't directed at you, I was referring to other single websites. :tup::tiphat:

Oh yeah I know :)

I have too many 6000k bulbs in stock. Let's get some ordered up!

Weekend orders shipping today!

I am on the weekend order list!!! Thanks JWM

I'm working on the labels now :)

In stock!

SO SORRY FOR THE LATE REPLY MAN IM SURE U GOT THEM IN BY NOW BUT MY BULBS TOOK 3 DAYS TO COME IN AND GIVE MY PEARL WHITE THE DEEP BLUE EYE LOOK I WANTED :tup:

Got the full suite of JWM lights, ordered this weekend and they showed up yesterday! Great business practices going on, many thanks.

haha its alright yea i installed my yesterday but had a lil issue with the bulbs but thanks to JWMotoring with the quick reply hopefully it'll get resolved soon:tup:

Replacement bulb went out today. Sorry about the issue.

If anyone is wondering one of his was a little purple (6000k). Not sure what happened, but we sent him a new one on us.

Thanks I appreciate it only thing sucks is I won't be able to instal them til after next weekend since I'll be busy with work but one way or another it'll be done
:happydance:

All temps in stock

so which bulb has the most blue tint in the z? 6000, 8000, 10000?

I was leaning towards the 8000. cause i figured it had more of a blue tint compared to the 6000. what did you not like about the 8000 in the z?

thanks

IIRC 10,000k is almost purple in color. 6,000k is like white/blue, and 8,000k is like deep blue.


Sent from my iPizzle using magic and new fangled science stuff.

If you want blue go with 8000k. Like mentioned 10k starts to get into the purple range a bit.

We'll be offering 5000k in about 1 week. It's pretty much like stock without the yellowish color. Basically a pure white.

All temps in stock

Is there any way to increase the HID light output for the 370Z (upgrade to 55W ballast??)

55 watt ballasts would do it. I have no clue on how to do that on the 370Z though.