Which splash shield do you have? When and where did you purchase it? Only the original version 1 shield for the non-Nismo cars would not clear lower oil pans. All new shields have plenty of room for deeper pans or pan spacers.

PM sent with details .... thanks for responding Joe...

All version 2 Shields are In Stock! These will clear bigger oil pans and oil pan spacers! We also made room for the Hotchkis sways! These are available in Micro-tex black powder coat and non-powdercoated aluminum.
http://www.zspeedperformance.com/ima...339811920.jpeg

Nismo? We have your shield also!
http://www.zspeedperformance.com/ima...164507861.jpeg

Can you please PM me the price of the powder coated black and regular versions for a 09 Sport shipped to 77407.

Also need the price for red samco radiator hose kit, and/or yellow if that's in stock.

Bump!

If you have a 370Z, YOU NEED THIS! :tup:

I am one VERY SATISFIED customer. This is probably the first mod everyone should purchase for their Z's.

I need the latest version for my Z since my oem ones are burnt:shakes head: how much for the piece to be shipped to KC2935 Brunei Darussalam please? Thank you :)

How much shipped to 54701 aluminum

PM's sent, Plenty in stock and ready to ship!

Bump! In stock and ready to ship!

Plenty In Stock! PM For best deal!

non-black shipped to 22408 for 2012 370z?

PM Sent!

I've got it installed and officially a satisfied customer. Thanks Joe for the under pan and show n' go kit :tiphat:

Hey Joe. Are you still making the V1 shroud? It shows sold out on your site.
I don't need the extra depth of the V2.
Thanks.

Sorry the V1 is no longer made, The V2 is better in every way ;)

Ok cool.

One more question though. How do you order the aluminum version? The details say to "click button below", but there's no button.

In Stock in Both Styles!

Awesome, gonna put an order in while they're in stock.

Looking to get the Base version 2 Powder coated, with SS hardware. :tup:

Order placed. :tiphat:

Bump! In Stock!

Thank you!

Bump!

Order placed on the 24th, package arrived on the 27th. :tup:

Note: The bolts that come with it if you order the SS hardware kit are HEX Sockets. Joe, what size are they cause I need to go get a hex socket bit set. :facepalm: :icon17:

And there isn't an "instructions" page included that I noticed, am I guessing it's just swap old parts 1 for 1, with washers?

Will the plastic rivets be re-used or are bolts going in their place now as well?

Remove/Replace, Pretty simple once you get down there.
You should have received 3 new plastic rivets for the middle part. The rest use bolts/washers

Hex key is a 5/32" , You can reuse the old bolts also which are 10mm head size.

Just what I needed to know. I'll pick one up this weekend and knock it out. :tup:

Bump!

Shipped to 32955?

Joe, I have a bit finally and hopefully will have it installed early afternoon tomorrow. I'm going to document it for some people locally, I'll post them here in case you want to use them. :tiphat:

Any chance of changing the oil filter access door to the other side for those with oil relocation kits?

I would buy one in second, if that option was available :tup:

Bump!

DIY ZSpeed Aluminium Undertray Install
 

Just Installed mine today! Install was super easy. :tup:

Tools Required:
10mm Socket for OEM bolt removal
5/32nds Hex Bit for ZSpeed Bolts
Flathead screwdriver for pop rivets

Onto the pics!

Here's my plastic undertray, it's been in need of dire replacement for some time.
http://www.the370z.com/attachment.ph...1&d=1365630092

ZSpeed Aluminum Undertray
http://www.the370z.com/attachment.ph...1&d=1365630092

To install, simply remove your plastic undertray with all 16 bolts and 3 pop clips. I ordered my Undertray with the additional stainless steel bolts and they look great. There will be 16 bolts, 16 washers, and 12 receiver clips for the bolts to replace the OEM ones. Seen here:

Old Clip
http://www.the370z.com/attachment.ph...1&d=1365630092

New Clip
http://www.the370z.com/attachment.ph...1&d=1365630092

You will be removing and replacing the clips for all of these places on the original undertray.
http://www.the370z.com/attachment.ph...1&d=1365631186

And make sure you replace all 16 Bolts and 3 Pop Rivets when you're done.
http://www.the370z.com/attachment.ph...1&d=1365631186

Thanks to AK370Z for those 2 pics. :tiphat:

Make sure to keep the piles of clips separated so you don't re-use an old one. They will also be different colors so that can help differentiate as well.

Side Bolts Installed
http://www.the370z.com/attachment.ph...1&d=1365630092

Front Bolts Installed
http://www.the370z.com/attachment.ph...1&d=1365630092

I went ahead and put the 3 plastic pop rivets back in to prevent the panel from rattling against the crossbar. They pop right back in. :tup:
http://www.the370z.com/attachment.ph...1&d=1365630092

And of course, the amazing trap door...
http://www.the370z.com/attachment.ph...1&d=1365630092

With the door removed, you can see you have plenty of clearance to get to the oil drain plug, and potentially the filter. I have a sandwich plate installed with my oil cooler, I'm not worried about draining, only about getting my arm articulated up in there to get the filter loose and removed. I'll post an update when I do my next oil change. :tup:

http://www.the370z.com/attachment.ph...1&d=1365630092

http://www.the370z.com/attachment.ph...1&d=1365630092

looks awesome man!

price shipped to 17055..

Looks Great, If I do say so myself ;)

A few notes, You can re-use the old hardware if its in good shape, All the bolt threads are OEM size. We include the new J-Nuts in case the stock ones have rusted and are stuck or broken.

Only the Stainless hardware kit requires the 5/32" hex bit, Standard hardware we offer that comes with the shields unless you upgrade to the Stainless is 10mm head like the stock stuff.

Thanks for taking time to do this, I'm sure it will be a help to others!

:tiphat: Thanks for the super quick shipping and a good sturdy product. I just wish it wasn't up under the car where it can't be seen. :icon17:

looks great! :tup:

Just ordered one for my nismo, looking forward to getting this installed.

How soon will the V2 powdercoat be available? Currently sold out. :(