GB so far
1)CarbonZ, Kit 1, Cf console, extra sensors
2)Max Flores Kit 1, Cf console, airlift cutout, extra sensors
3) Mike Mixon Kit 2
4) Yushi Shirai, Kit 1, Cf console,
5) Mattew Shelton Kit 1, Cf console,
6) Steve Wiggins, Kit 1, FRP black console, extra sensors
7) Hans Govil, kit 1, frp black console
8) Jeremy Sutton, kit 1, frp with leather with silver stitch, ODBII, no badge
9)
10)

Sorry posted late...

GB so far
1)CarbonZ, Kit 1, Cf console, extra sensors
2)Max Flores Kit 1, Cf console, airlift cutout, extra sensors
3) Mike Mixon Kit 2
4) Yushi Shirai, Kit 1, Cf console,
5) Mattew Shelton Kit 1, Cf console,
6) Steve Wiggins, Kit 1, FRP black console, extra sensors
7) Hans Govil, kit 1, frp black console
8) Jaytirbhaw, Kit 1, Alacantra wrapped FRP, extra sensors
9) Evan OSteen (Stillenz84) kit 2
10) Jeremy Sutton, kit 1, frp leather with silver stitch, ODBII, no badge

Legit question!


Sent from my iPhone using Tapatalk

I'm in for kit 1 in CF if it's not too late.

sorry im a little slow... so let me get this straight.. since all the reading is from the cable to the obd2.. it would read both banks of afr, fuel, oil, water, gas , intake temp, rpm,throttle, etc... exception of the the pressure ones like oil, fuel, and ex manifold presssure right? so whats the point of listing the temp sensors when it already read it off the obd2 and displays it on the screen... unless the after market once is more accurate or something? again sorry im just trying make it clear before i know what im going to purchase..

I am in for kit1, contingent on a response to my questions.

By Default we will have two schemes, will post pictures today or tomorrow, and will be mentioned in the invoice as well, sequence in screen is same its just one will have boost in page 3 for NA and one will have in starting page for FI, rest all is same.

We can display any gauge sequence but there will a charge of 240$ to redo the firmware for that design, but answer is YES can be done as a custom order.

Screen and module are powered together so we wont suggest running movies on he screen, and no it might not work.

Matte black wont be matching to the interior as interior is grayish, but we are charging a minimal amount 25$ for cleaning the FRP and painting it, you can try it on if doesn't like can redo he colour or wrap it.


this screen will work on AUX, so obviously cant see anything else, you need to switch to navi to see navi and press AUX to come back on the screen

Yes it can you need to connect the wires from sensors to the screen for one or both.

Some people prefer to use aftermarket ones so that why though they are not needed by any means.

Keep adding the name please

GB so far
1)CarbonZ, Kit 1, Cf console, extra sensors
2)Max Flores Kit 1, Cf console, airlift cutout, extra sensors
3) Mike Mixon Kit 2
4) Yushi Shirai, Kit 1, Cf console,
5) Mattew Shelton Kit 1, Cf console,
6) Steve Wiggins, Kit 1, FRP black console, extra sensors
7) Hans Govil, kit 1, frp black console
8) Jaytirbhaw, Kit 1, Alacantra wrapped FRP, extra sensors
9) Evan OSteen (Stillenz84) kit 2
10) Jeremy Sutton, kit 1, frp leather with silver stitch, ODBII, no badge

Update:

GB so far
1)CarbonZ, Kit 1, Cf console, extra sensors (INVOICE SENT)
2)Max Flores Kit 1, Cf console, airlift cutout, extra sensors (INVOICE SENT)
3) Mike Mixon Kit 2 (INVOICE SENT)
4) Yushi Shirai, Kit 1, Cf console (INVOICE SENT)
5) Mattew Shelton Kit 1, Cf console (INVOICE SENT)
6) Evan OSteen (Stillenz84) kit 2 (INVOICE SENT)
7) FiftyFiv3 Kit 1, FRP unpainted, OBDII, (INVOICE SENT)

Below guys please send us email address for invoice to be sent

8) Steve Wiggins, Kit 1, FRP black console, extra sensors
9) Hans Govil, kit 1, frp black console
10) Jaytirbhaw, Kit 1, Alacantra wrapped FRP, extra sensors
11) Jeremy Sutton, kit 1, frp leather with silver stitch, ODBII, no badg

So, that is a yes, you will not be able to listen to music, through the car, while in AUX mode while using this on the stock nav. I'm assuming from your round about answer to my question.

We've been talking via email. I just responded again.

Update:

GB so far
1)CarbonZ, Kit 1, Cf console, extra sensors (INVOICE SENT)
2)Max Flores Kit 1, Cf console, airlift cutout, extra sensors (INVOICE SENT)
3) Mike Mixon Kit 2 (INVOICE SENT)
4) Yushi Shirai, Kit 1, Cf console (INVOICE SENT)
5) Mattew Shelton Kit 1, Cf console (INVOICE SENT)
6) Evan OSteen (Stillenz84) kit 2 (INVOICE SENT)
7) FiftyFiv3 Kit 1, FRP unpainted, OBDII, (INVOICE SENT)

Below guys please send us email address for invoice to be sent

8) Steve Wiggins, Kit 1, FRP black console, extra sensors
9) Hans Govil, kit 1, frp black console
10) Jaytirbhaw, Kit 1, Alacantra wrapped FRP, extra sensors
11) Jeremy Sutton, kit 1, frp leather with silver stitch, ODBII, no badge


12)370Z JT, FRP unpainted console only, nothing extra

I replied to your invoice, I need it sent to an alternate email without oil pressure.

Sent from my SM-G925T using Tapatalk

Sorry posted late...

GB so far
1)CarbonZ, Kit 1, Cf console, extra sensors
2)Max Flores Kit 1, Cf console, airlift cutout, extra sensors
3) Mike Mixon Kit 2
4) Yushi Shirai, Kit 1, Cf console,
5) Mattew Shelton Kit 1, Cf console,
6) Steve Wiggins, Kit 1, FRP black console, extra sensors
7) Hans Govil, kit 1, frp black console
8) Jaytirbhaw, Kit 1, Alacantra wrapped FRP, extra sensors
9) Evan OSteen (Stillenz84) kit 2
10) Jeremy Sutton, kit 1, frp leather with silver stitch, ODBII, no badge
11) Dean Sultan, kit 2 (deans1993@hotmail.com)

ok i am in for Kit #2

What does the OBD II cable look like? Will it be low profile and how invasive is the install for those who already have navi. I know there has to be some bypass of the Aux screen shutoff.