Issues & Defects from factory

Gee

Yes, we are all getting over it, hence the leprachauns and such, however, my additional 20c worth.

whenever manufacturers specify the measurements of components (from wherever they get them) there is always a margin of error that needs to be stated. Nothing manufactured is ever 100% to spec. If I specify a screw of 10mm length and 5mm width it always 10mm length +/- 5 microns, or whatever. The smaller the margin of error the harder it is to meet that error, i.e. the manufacturer has to throw out those that don't mee the specs - the smaller the margim of error the higher the manufacturing costs.
Now, If I know that I cannot produce a speedo that shows less that the 'true' speed for legal reasons and I want to keep costs down then I will specify the components be made to show 'true' speed + 10% with a margin of +/- 5%. Then I am keeping my costs down and know that the speedo will (almost) never show less than the 'true' speed. i.e. it will show from 'true' + 5% to 'true' + 15% at the outside margin of error.

Somple - costs are low and I am now within my legal obligations. Hence, speedos show around 'true' + 5 - 10% on average.

math rules!

G

__________________
"...'cause the only decent things that come in 2 litres are milk & orange juice"