ASWC Wiring Clarification

Blu Z · 08-17-2014, 11:03 AM

Here's what I did for my 2014 with a Kenwood DDX470. Some pins had to be moved around to match the vehicle harness, but it works perfectly now:

RedShifter · 08-29-2014, 05:17 PM

Alright...so I thought everything was connected correctly because I was getting lights on the ASWC-1 unit. This is what I had...

Gray/Red wire going to Pink wire (Pin 6)

And Gray/Blue wire going to Blue wire (Pin 16)

Pin 15 is the black wire and I have that grounded.

So with the setup above I could only get the volume up and volume down buttons to work on the steering wheel via auto program.

I called AXXESS and they advised that I simply switch the setup above.

Meaning...

Gray/Red to Pin 16
&
Gray/Blue to Pin 6

Then to hold the reset button down for 3 seconds and wait till it goes steady then hold the volume up button until the light goes out.

Hopefully that will work out. Ready to put this behind me!!

Can anyone advise if this will work?

08-17-2014, 11:03 AM	#1 (permalink)
Blu Z Base Member Join Date: Oct 2013 Location: Southeastern KY Posts: 54 Drives: '14 MB 6MT 370Z Rep Power: 13	Here's what I did for my 2014 with a Kenwood DDX470. Some pins had to be moved around to match the vehicle harness, but it works perfectly now: __________________ 2014 MB 370Z 6MT sport - ordered 11/6/13 - delivered 1/27/14 --> Pics! WeatherTech floorliners / Kenwood DDX470 w/ Axxess ASWC-1 / GT-R start button / Aftermarket clutch helper spring / Escort Redline / Llumar CTX 30%

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Axxess ASWC wiring.	Z33knight	Audio & Video	16	12-19-2019 11:54 AM
Need clarification on Kinetix camber arm description!	NOFATCHX	Brakes & Suspension	3	09-15-2013 10:52 AM
noob q about aswc wiring	Kandy OrangeZ	Audio & Video	4	07-03-2011 07:27 AM
OEM exhaust removal clarification	FromG2Z	Intake/Exhaust	3	04-13-2011 07:58 PM
Clarification Re: Sticking Hatch	rmorrow	Nissan 370Z General Discussions	4	08-19-2010 08:11 PM

08-29-2014, 05:17 PM	#2 (permalink)
RedShifter Base Member Join Date: Jul 2014 Location: United States Posts: 32 Drives: 2014 Rep Power: 13	Alright...so I thought everything was connected correctly because I was getting lights on the ASWC-1 unit. This is what I had... Gray/Red wire going to Pink wire (Pin 6) And Gray/Blue wire going to Blue wire (Pin 16) Pin 15 is the black wire and I have that grounded. So with the setup above I could only get the volume up and volume down buttons to work on the steering wheel via auto program. I called AXXESS and they advised that I simply switch the setup above. Meaning... Gray/Red to Pin 16 & Gray/Blue to Pin 6 Then to hold the reset button down for 3 seconds and wait till it goes steady then hold the volume up button until the light goes out. Hopefully that will work out. Ready to put this behind me!! Can anyone advise if this will work?