finally all new audio

kenchan · 08-11-2014, 11:10 AM

wat i would do is place a collar inside the boot so that it's got a more pronouced mt.fuji shape so that the bottom of the finisher lands without over hang.

RBfastback · 08-11-2014, 11:23 AM

I'm not that happy with it, I'll mess with it later. probably order a boot and figure out a different method of keeping the boot up and no collar. maybe try out the collar on the inside to see what it looks like with the ballcock washer

memphisz.exe · 08-11-2014, 11:42 AM

Nice setup bro! Where did you get the box your sub is in? Perfect setup!

RBfastback · 08-11-2014, 11:46 AM

it comes like that from JL, it's there combo.
the JL CS110LG- is the code for the box and the 10TW3D4 sub put together by jl so it's perfect for cubic air

memphisz.exe · 08-11-2014, 12:27 PM

Thanks for the info!

FrostyNaples · 08-12-2014, 02:06 PM

Quote:

Originally Posted by RBfastback

ok so the sub:
it's amazing, sometimes I look back an forget its not a 12. I researched this sub alot!!
pretty good all around sub and it hardly takes up any space.
it hit's damn hard on deep bass i even have the gain turned down a little and on 4 out if 6 on the head unit (depends on the song tho.
but like I said I'm no expert I just read an watched all the reviews online.
I couldn't be happier!

shift knob is the sphere from lathe werks, he is a really good guy!
he can do anything u want
it threads on very low I also did a little customizing and if ur interested I can go into greater detail for u on how to get the owm shifter low with that knob I just didnt like the way the twm short shifter felt.
this sits just as low and the knob weighs 500 grams. he can customize the know however u want. best costumer service ever

it can get hot if I don't use the windshield shade. been thinking of getting it powder coated wrinkle black the to help with the heat but I kinda like the way it looks so ill wait until it gets all scratched up to do that. it's not that bad tho.

What a great moderate setup you have there.

Very simple, nice W3 series, and optimal power with the matched amplifier.

I'm sure with our small cabin space that does hit as hard as you describe.

I might have to go that route. I've been dying to get bass into this car, but funds haven't allowed those kinds of toys yet.

I've just got an itch for something though, driving me nuts.

My dilemma is mostly cost, and my OCD on how to do things.

I have a universal cell phone bracket i need to install, and its going in with the stereo crevice on the right hand side, BUT, since it requires me to remove the factory base radio, i'm waiting until i get an aftermarket HU. If i get an aftermarket HU, i'm going to run the wires for the rest of the future system at that time.

I like to do things once... But i'm not sure how much more I can stand without Bluetooth or some bass.

My last nice system were (3) 10W6V2's sealed with a JL 1000/1 in the back of a 2003 Sentra SE-R.

Then I went to an Altima Coupe, moved, and haven't had the coin to get a system since.

Now with the Z, it just is begging me for something, anything.... lol

RBfastback · 08-30-2014, 08:55 AM

Quote:

Originally Posted by FrostyNaples

I've just got an itch for something though, driving me nuts.

My dilemma is mostly cost, and my OCD on how to do things.

I like to do things once... But i'm not sure how much more I can stand without Bluetooth or some bass.:

thanks man,

yeah that's what was bothering me mostly too the Bluetooth an some bass.
electronic music just isn't the same without bass.

I have a problem with being a little OCD about all if my projects and wanting installers or tec's to do things the way I would if I had there knowledge...
so I was lazy and payed a little extra to have someone do it.

RBfastback · 08-30-2014, 09:00 AM

also I just did this little project the other night!

used a step drill bit and dremel with some other tools to make a bass knob fit into the center blank button.
didnt want it to stick all the way up but just half of the knob to stick out.
I'm pretty happy with the outcome

memphisz.exe · 08-30-2014, 10:55 AM

Nice looking setup!

kenchan · 08-30-2014, 07:07 PM

good job on the pot

RBfastback · 08-30-2014, 07:09 PM

that's where I do most of my "work"

Kayzee · 08-30-2014, 07:48 PM

How much did the setup run from start to finish?

RBfastback · 08-30-2014, 08:28 PM

ok let me try an get this right for u...
-deck $400
-dash kit $60
-harness $15
-antenna adapter $15
-JL box an sub $290
-hertz 6.5 comp $190
-the wire kit for everything $100
-the jl bass knob $30
-I was given the amp from a friend that didnt want it
-already had the tools and don't remember how much the epoxy was

totaling $1,100

08-30-2014, 09:00 AM	#23 (permalink)
RBfastback Enthusiast Member Join Date: Mar 2014 Location: FM, Florida Posts: 311 Drives: 13 370z Nismo PW Rep Power: 11	also I just did this little project the other night! used a step drill bit and dremel with some other tools to make a bass knob fit into the center blank button. didnt want it to stick all the way up but just half of the knob to stick out. I'm pretty happy with the outcome kenchan and FrostyNaples like this.

08-30-2014, 07:48 PM	#27 (permalink)
Kayzee Enthusiast Member Join Date: Jul 2012 Location: New York, NYC Posts: 361 Drives: around Rep Power: 12	How much did the setup run from start to finish? __________________ 2010 Sport, Magnetic Black Top Speed Pro 1 CBE - Swift Spec R - Stillen Splitter - 35% Tint - Tinted tails - 6k HID -ES113 20x10 20x11

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Finished audio project...FINALLY	chops	Audio & Video	31	06-17-2013 05:12 PM
New STAGE 3 SYSTEM FOR THOSE 370Z Audio Fanatics from Wicked CAS Special Audio	Wicked CAS	Audio & Video	0	03-07-2013 04:16 PM
[FOR SALE] Hybrid Audio 6.5, Arc Amps, Custom 12" Sealed Box w/sub, Audio Control 6xs, LC8i	Omikron	Parts for sale (Private Classifieds)	0	06-12-2012 08:16 AM
NismoGT's Audio Install - iPad & Sundown Audio :)	NismoGT	Audio & Video	2	02-20-2012 04:06 AM
[FOR SALE] Complete Audio system stuff!! Alpine AMP + JL Audio Subwoofer + Stinger wiring kit!!	enkei2k	Parts for sale (Private Classifieds)	24	08-04-2011 03:24 PM

08-11-2014, 11:10 AM	#16 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141520	wat i would do is place a collar inside the boot so that it's got a more pronouced mt.fuji shape so that the bottom of the finisher lands without over hang.

08-11-2014, 11:23 AM	#17 (permalink)
RBfastback Enthusiast Member Join Date: Mar 2014 Location: FM, Florida Posts: 311 Drives: 13 370z Nismo PW Rep Power: 11	I'm not that happy with it, I'll mess with it later. probably order a boot and figure out a different method of keeping the boot up and no collar. maybe try out the collar on the inside to see what it looks like with the ballcock washer

08-11-2014, 11:42 AM	#18 (permalink)
memphisz.exe Base Member Join Date: Jun 2014 Location: Arlington, TN Posts: 55 Drives: 11 Nissan 370-manual Rep Power: 10	Nice setup bro! Where did you get the box your sub is in? Perfect setup!

08-11-2014, 11:46 AM	#19 (permalink)
RBfastback Enthusiast Member Join Date: Mar 2014 Location: FM, Florida Posts: 311 Drives: 13 370z Nismo PW Rep Power: 11	it comes like that from JL, it's there combo. the JL CS110LG- is the code for the box and the 10TW3D4 sub put together by jl so it's perfect for cubic air

08-11-2014, 12:27 PM	#20 (permalink)
memphisz.exe Base Member Join Date: Jun 2014 Location: Arlington, TN Posts: 55 Drives: 11 Nissan 370-manual Rep Power: 10	Thanks for the info!

08-30-2014, 10:55 AM	#24 (permalink)
memphisz.exe Base Member Join Date: Jun 2014 Location: Arlington, TN Posts: 55 Drives: 11 Nissan 370-manual Rep Power: 10	Nice looking setup!

08-30-2014, 07:07 PM	#25 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141520	good job on the pot

08-30-2014, 07:09 PM	#26 (permalink)
RBfastback Enthusiast Member Join Date: Mar 2014 Location: FM, Florida Posts: 311 Drives: 13 370z Nismo PW Rep Power: 11	that's where I do most of my "work"

08-30-2014, 08:28 PM	#28 (permalink)
RBfastback Enthusiast Member Join Date: Mar 2014 Location: FM, Florida Posts: 311 Drives: 13 370z Nismo PW Rep Power: 11	ok let me try an get this right for u... -deck $400 -dash kit $60 -harness $15 -antenna adapter $15 -JL box an sub $290 -hertz 6.5 comp $190 -the wire kit for everything $100 -the jl bass knob $30 -I was given the amp from a friend that didnt want it -already had the tools and don't remember how much the epoxy was totaling $1,100