Engine Noise :(

bigaudiofanat

I used regular screws not drywall screws the thread were not that far apart also if you want o help it hold there put some 2 part epoxy on the threads or some kind of glue. But it will hold either way. The wake up line might give you some interference and might want to try moving that as well. Also you should not have to relocate your amp just to get rid of noise you can get a longer ground wire than what they include. Go to your local car audio place and pickup like a 4 ft piece of ground wire that way you can cut it to length and also get a O ring connector as well. Just try to keep your ground as short as possible. I think you should try the grounding of the head unit first. Also were is your Y splitter? It should be that the Y splitter is were your amp is and not behind the head unit. You should split the signal after it runs to the back.

__________________
Need help with car audio or electronics? Let me know!! Need Help Let Me Know
Direct email address reimermatt@gmail.com
Owner of: Dynamic Mobile Audio Follow me below
https://www.facebook.com/Dynamicmobileaudio/