How To - Power Wire Run from Battery to Rear Hatch Area

a6walter1

I looked for many hours on these forums to find a comprehensive guide on how to run the power wire and didnt have any luck, I found the beginning and the end of the wire. So hopefully this guide will help others.

Products - 4AWG Power Wire, Streetwires fuse holder, 80 AMP Fuse, Streetwires 4AWG ring terminals



Step 1 - Mount the fuse holder, I found an empty hole to mount it to.



Step 2 - Cut a length of wire to run from the battery to the fuse holder



Step 3 - Run the wire around the back of the battery and push it through the grommet in the corner of the battery bay.



Step 4 - Feed the wire down the passenger side footwell, be sure to take off the door sil panel and the front quarter panel to run the wire.



Step 5 - Run the wire through the stock wire holder along side the factory harness.



Step 6 - Feed the wire behind the panel that has the rear speaker in it, the wire will come out where the factory harness comes out in the rear hatch area.

__________________

My Journal (2012 PW 7AT)