Just want more bass for Bose

sparky

I guess if your amp has a left and right input then to get a left and right output of the LC2i you have to feed it a left and right signal. As the bose sub only has a mono feed then bridging it to both is how this is achieved. It was just a question I asked and that was his answer so I went with it! Obviously your feeding both channels with the same signal and it gets summed in the amp but my amp manual said it would have low output if you didn't feed both left and right inputs.That's why I asked him how to do this and his answer is above, so I went with it. Hope that makes sense!
Matt will probably jump in here at some point and correct me I'm sure.
Edit: His comment above should read" you could y out either at the speaker level output from your BOSE amp or at the ..................

__________________
2012 370Z GM 7AT/JWM LEDs / 3M clear bra / 35% tint / GTR start button / FI CBE SS 18" RES / Momo shift knob / K & N Typhoon / Z1 hood struts / H&R 20mm f/r / illuminated kickplates