New wicked cas 370z corner sub box magic box thread stealth trunk subwoofer enclosure

[vermithrax]

Heli, now that you actually have the box installed, how hard is it to get to the spare? Did you modify anything to make it easier?

[helidriver]

Originally Posted by vermithrax

Heli, now that you actually have the box installed, how hard is it to get to the spare? Did you modify anything to make it easier?

Honestly, I didn't even think about the spare, so I'm not sure.

[Wicked CAS]

Originally Posted by helidriver

Honestly, I didn't even think about the spare, so I'm not sure.

Corrugated platform can be bent on the sub box line. or possibly cut and taped back together with 2" or 3" Black Tape to be able to fold up at the seem when spare tire needs to be taken out.

Can one of you see if the platform will slide out of the way and be pushed back in?

Velcro has worked for some people,,, I do not recommend it.

[37Z]

Originally Posted by helidriver

Honestly, I didn't even think about the spare, so I'm not sure.

I thought about the removal of the sub box prior to designing my sub box to fit in the rear hatch area where the foam piece is located. The sub box in this location does not have to be removed in the event of a flat tire. I fabricated my sub box out of fiberglass with a basa-core weighting in at 6 lbs. The sub box has a gel-coat finish with a similar finish like the plastic 370Z interior panels. The sub box is designed to be flush with the 370Z hatch floor and has a speaker cloth covering the sub and signal processor for a stealth look. The sub box houses a 8" sub, Audison bitTen, and a 5-channel amp. Bear in mind, that a 8" sub is the maximum size sub that will fit in this area of the rear hatch. Sound-wise is good mostly due the the bitTen signal processor.

Check out my post or PM me if curious.