Bose/Non Nav Front Replacement Speakers

jaycz · 12-07-2011, 09:31 PM

Been doing some speaker research on the forum. Looks like my Bose/ Non Nav has 6x9 speakers in the front door. I would like to install some Focal Polyglass 165 VB's or even 130's. Do they make an adaptor for this or will I have to fab some myself? What are my options? If I'm going to take my Z apart, I want to put something decent in for my efforts. Install will include HU, amp and front speakers only. My Bose is making me sad.

bigaudiofanat · 12-07-2011, 09:34 PM

Check the stickies just made one the other day.

jaycz · 12-07-2011, 09:41 PM

Quote:

Originally Posted by bigaudiofanat

Check the stickies just made one the other day.

Thank you, nice post. I missed it. Can you point to some spacer rings for the 6 x 9's to 6.5's?

bigaudiofanat · 12-07-2011, 09:51 PM

Quote:

Originally Posted by jaycz

Thank you, nice post. I missed it. Can you point to some spacer rings for the 6 x 9's to 6.5's?

The nice thing about the Focal polyglass is all you will need is the base 6.5 speaker bracket and just use the ring that comes with the focal's to move it out a bit and that is all you need. There is a pic of them installed under the california thread.

bigaudiofanat · 12-07-2011, 10:08 PM

Make sure your running them off a new amp and run new speaker wires!!

jaycz · 12-07-2011, 10:15 PM

Quote:

Originally Posted by bigaudiofanat

The nice thing about the Focal polyglass is all you will need is the base 6.5 speaker bracket and just use the ring that comes with the focal's to move it out a bit and that is all you need. There is a pic of them installed under the california thread.

Can a base 6.5 bracket be found? I would imagine Nissan would want an arm and a leg for some. Speaker wires will be replaced and new amp and HU installed.

bigaudiofanat · 12-07-2011, 10:25 PM

Quote:

Originally Posted by jaycz

Can a base 6.5 bracket be found? I would imagine Nissan would want an arm and a leg for some. Speaker wires will be replaced and new amp and HU installed.

Yes, maybe even ask one of the members in the fs section that has wrecked.

You could always make your own as well.

secondnissan · 12-08-2011, 02:50 AM

just use these spacers. Bolt right up to the factory 6x9 bracket, just need to cut the speaker hole in the adapter accordingly. My 6.5's wouldn't clear the standard cut out.Amazon.com: Scosche SA69 Convertible 6x9-Inch Speaker Adapter - Pair: Car Electronics

jaycz · 12-08-2011, 07:24 AM

Thanks Guy! Both of you were a big help. This forum is great!

bigaudiofanat · 12-08-2011, 09:56 AM

Quote:

Originally Posted by secondnissan

just use these spacers. Bolt right up to the factory 6x9 bracket, just need to cut the speaker hole in the adapter accordingly. My 6.5's wouldn't clear the standard cut out.Amazon.com: Scosche SA69 Convertible 6x9-Inch Speaker Adapter - Pair: Car Electronics

The only problem with those is 2 things. They are very thin and will not provide the extra space needed for clearance that the base OEM ones will. So if he did use them he would have to make new MDF spacers for them.

jaycz · 12-08-2011, 03:07 PM

Quote:

Originally Posted by bigaudiofanat

The only problem with those is 2 things. They are very thin and will not provide the extra space needed for clearance that the base OEM ones will. So if he did use them he would have to make new MDF spacers for them.

Thanks for the heads up.

eastwest2300 · 12-08-2011, 04:20 PM

Quote:

Originally Posted by jaycz

Thanks Guy! Both of you were a big help. This forum is great!

I thought about swapping 6.5 mounts for 6x9 mounts but I like the idea of running components. Im sure someone is willing to do it.

CSA0890 · 12-08-2011, 07:01 PM

How deep of a speaker can you fit into the hole? I am wanting to run RF T1692s. think they would fit?

bigaudiofanat · 12-08-2011, 08:17 PM

Quote:

Originally Posted by CSA0890

How deep of a speaker can you fit into the hole? I am wanting to run RF T1692s. think they would fit?

With the base oem brackets and a set of spacers you can fit any 6.5

CSA0890 · 12-08-2011, 08:20 PM

what about 6x9 though? I saw it is 3.5 inches deep

12-07-2011, 09:31 PM	#1 (permalink)
jaycz Base Member Join Date: Aug 2010 Location: Oregon Posts: 189 Drives: 09 370z Tour Red 6MT Rep Power: 14	Bose/Non Nav Front Replacement Speakers Been doing some speaker research on the forum. Looks like my Bose/ Non Nav has 6x9 speakers in the front door. I would like to install some Focal Polyglass 165 VB's or even 130's. Do they make an adaptor for this or will I have to fab some myself? What are my options? If I'm going to take my Z apart, I want to put something decent in for my efforts. Install will include HU, amp and front speakers only. My Bose is making me sad. Last edited by jaycz; 12-07-2011 at 09:35 PM.

12-07-2011, 09:34 PM	#2 (permalink)
bigaudiofanat Car Audio Installer Join Date: Jun 2009 Location: Magnolia DE Posts: 8,342 Drives: 2012 Infiniti G37x Rep Power: 852	Check the stickies just made one the other day. __________________ Need help with car audio or electronics? Let me know!! Need Help Let Me Know Direct email address reimermatt@gmail.com Owner of: Dynamic Mobile Audio Follow me below https://www.facebook.com/Dynamicmobileaudio/

12-07-2011, 10:08 PM	#5 (permalink)
bigaudiofanat Car Audio Installer Join Date: Jun 2009 Location: Magnolia DE Posts: 8,342 Drives: 2012 Infiniti G37x Rep Power: 852	Make sure your running them off a new amp and run new speaker wires!! __________________ Need help with car audio or electronics? Let me know!! Need Help Let Me Know Direct email address reimermatt@gmail.com Owner of: Dynamic Mobile Audio Follow me below https://www.facebook.com/Dynamicmobileaudio/

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] Stock OEM Speakers (NON BOSE)	symple84	Parts for sale (Private Classifieds)	10	11-15-2011 03:20 PM
F/S Bose Speakers and Sub	Z Monster	Parts for sale (Private Classifieds)	19	04-13-2011 12:23 AM
Replacing the Stock Speakers/ Non Bose	Texas370z	Audio & Video	15	04-11-2011 01:47 AM
Aftermarket Deck with Bose speakers	cfleming2226	Audio & Video	45	03-09-2011 09:34 AM
FS: Bose Speakers & Sub	370book	Parts for sale (Private Classifieds)	1	04-11-2010 01:05 AM

12-08-2011, 02:50 AM	#8 (permalink)
secondnissan Base Member Join Date: May 2011 Location: chicago burbs Posts: 70 Drives: 10 370z 7at Rep Power: 13	just use these spacers. Bolt right up to the factory 6x9 bracket, just need to cut the speaker hole in the adapter accordingly. My 6.5's wouldn't clear the standard cut out.Amazon.com: Scosche SA69 Convertible 6x9-Inch Speaker Adapter - Pair: Car Electronics

12-08-2011, 07:24 AM	#9 (permalink)
jaycz Base Member Join Date: Aug 2010 Location: Oregon Posts: 189 Drives: 09 370z Tour Red 6MT Rep Power: 14	Thanks Guy! Both of you were a big help. This forum is great!

12-08-2011, 07:01 PM	#13 (permalink)
CSA0890 Base Member Join Date: Nov 2011 Location: Oklahoma Posts: 174 Drives: 2011 Tour/Spt 7AT Rep Power: 13	How deep of a speaker can you fit into the hole? I am wanting to run RF T1692s. think they would fit?

12-08-2011, 08:20 PM	#15 (permalink)
CSA0890 Base Member Join Date: Nov 2011 Location: Oklahoma Posts: 174 Drives: 2011 Tour/Spt 7AT Rep Power: 13	what about 6x9 though? I saw it is 3.5 inches deep