Simple Speaker Recommendation for Base...

rreign · 05-05-2009, 03:09 PM

Well the stock set up has 6.5"s in the doors and 2.5"s in the dash. If yyou buy a different setup, you will most likely end up with the 6.5"s and 1" to 1.5" tweets. The tweets will have to be mounted with a bracket that will fit over the existing hole. Any car audio shop should be able to set you up with those. Don't be scared of the wiring. All you have to do is connect small + and - terminals to the end of the wires that you cut and plug them onto the + and - on the speakers. That's the easiest way I can explain it. Super simple bro! Now, let's see. Aftermarket component speaker set with tweets with about 25 - 30w RMS.... HMMM... Here's a few ideas

Alpine SPS-600C Type-S 6-3/4" component speaker system — fits in 6-1/2" or 6-3/4" openings at Crutchfield.com
Focal Access 165 A1 6-1/2" component speaker system at Crutchfield.com
Focal K2 Power 100KRS 4" component speaker system at Crutchfield.com

All of these have ratings from 2 - 80W RMS I'm sure that they will work. Just a matter of taking a look and seeing what impedence they are (2ohm,4ohm,8ohm etc.)

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Base vs. Bose speaker/sound	brisk	Audio & Video	73	12-20-2011 07:10 PM
Here's A SoCal Dealer Recommendation	VCuomo	Nissan 370Z Pricing / Ordering Discussions	0	05-02-2009 03:20 PM
My base speaker upgrade plan	Moto	Audio & Video	5	04-26-2009 01:47 PM
Base model speaker specs	pcollatZman	Audio & Video	12	04-24-2009 06:44 PM
Base Model speaker upgarde suggestions	pcollatZman	Audio & Video	4	03-10-2009 07:32 PM

05-05-2009, 03:09 PM	#7 (permalink)
rreign A True Z Fanatic Join Date: Apr 2009 Location: South Carolina Age: 40 Posts: 2,341 Drives: 03 Evo 8 Rep Power: 709	Well the stock set up has 6.5"s in the doors and 2.5"s in the dash. If yyou buy a different setup, you will most likely end up with the 6.5"s and 1" to 1.5" tweets. The tweets will have to be mounted with a bracket that will fit over the existing hole. Any car audio shop should be able to set you up with those. Don't be scared of the wiring. All you have to do is connect small + and - terminals to the end of the wires that you cut and plug them onto the + and - on the speakers. That's the easiest way I can explain it. Super simple bro! Now, let's see. Aftermarket component speaker set with tweets with about 25 - 30w RMS.... HMMM... Here's a few ideas Alpine SPS-600C Type-S 6-3/4" component speaker system — fits in 6-1/2" or 6-3/4" openings at Crutchfield.com Focal Access 165 A1 6-1/2" component speaker system at Crutchfield.com Focal K2 Power 100KRS 4" component speaker system at Crutchfield.com All of these have ratings from 2 - 80W RMS I'm sure that they will work. Just a matter of taking a look and seeing what impedence they are (2ohm,4ohm,8ohm etc.)