Help hardwiring radar detector

Wronka · 06-02-2012, 07:08 PM

I followed radar roys "how to hardwire a radar detector video" using an add a circuit to the lower left fuse box on the driver side. I have everything set up but I just don't know which fuse to tap. I am assuming I put it in the radio fuse. However, the add-a-circuit will fit into any of the fuse slots but the fuses wont fit into the add a circuit. what is going on here? do I need to buy a new type of fuse?

onzedge · 06-02-2012, 07:25 PM

Quote:

Originally Posted by Wronka

I followed radar roys "how to hardwire a radar detector video" using an add a circuit to the lower left fuse box on the driver side. I have everything set up but I just don't know which fuse to tap. I am assuming I put it in the radio fuse. However, the add-a-circuit will fit into any of the fuse slots but the fuses wont fit into the add a circuit. what is going on here? do I need to buy a new type of fuse?

I was going to go that route, but did this instead -- it only works if you have the Homelite mirror for the power and ground. It works great with my 9500ix.

ESCORT RADAR DETECTOR C65 STEALTH MIRROR POWER CORD NEW on eBay!

Wronka · 06-02-2012, 07:30 PM

yeah I saw that, I wish I had a home link mirror now but I don't lol

onzedge · 06-02-2012, 07:37 PM

Quote:

Originally Posted by Wronka

yeah I saw that, I wish I had a home link mirror now but I don't lol

Ah ha.

future370zzz · 06-04-2012, 02:37 PM

I did the same hardwire and it work fine on mine.

I used this one from Oriely's

Littelfuse FHM200BP - Fuse Holder | O'Reilly Auto Parts

I think you are trying to push in the fuse too much or you need to flip the fuse around and try again. The fuse that you add to the "add-a-circuit" fuse holder doesn't hold the fuse like the stock fuse box. It will stick out a little but still works. That's what I remember.

I just plugged it into a random fuse, maybe I should have used the radio one, but I chose the most accessible one. Everyone works fine...knock on wood.

martin82 · 06-04-2012, 09:12 PM

I used a one of those from autozone or pepboys, it sticks out too much and I can't out tue cover back, also if I tried to flip it it wouldn't work....

future370zzz · 06-05-2012, 08:51 PM

I took off the side kick plate and the whole plastic cover over the fuse box and put the fuse in the back away from the cover and it fit.

kenchan · 06-05-2012, 11:11 PM

you guys can sandwich a small pig tail in the fuse contact to run detectors. either solder a 1.5A fuse or use 2 female space connectors for a mini fuse and e-tape it in series.

you should be able to use the standard mini add-a-circuit though. the width/pitch is the same as the low-profile mini fuses.

haitech · 06-05-2012, 11:20 PM

Quote:

Originally Posted by martin82

I used a one of those from autozone or pepboys, it sticks out too much and I can't out tue cover back, also if I tried to flip it it wouldn't work....

Its should fit. I have 3 tap a fuses in there.

Or pick one of the fuses farthest from you when looking at it.

XwChriswX · 06-06-2012, 01:31 AM

I'll go to mine tomorrow and take some pictures so you can see what the finished product looks like and which fuse to tap. If you have most radar detectors, you want to make sure not to go for anything higher than a 10AMP fuse.

RUFFSTUFF · 08-26-2012, 08:04 PM

Thanks for the tips...

eastwest2300 · 08-27-2012, 12:43 AM

Quote:

Originally Posted by XwChriswX

I'll go to mine tomorrow and take some pictures so you can see what the finished product looks like and which fuse to tap. If you have most radar detectors, you want to make sure not to go for anything higher than a 10AMP fuse.

Thats correct, they dont require a lot of power to run them.

djtodd · 08-27-2012, 11:16 AM

I tapped into the switched 12v to the 12v outlet in the console. The harness is accessible right under the shift boot cover. There are two harnesses. One runs to the 12v outlet (2 wire) and one to (I think) the bosch sensor that has 6+ wires.

cezar_1 · 08-31-2012, 08:11 PM

Tap it in the visor light its easier and short wire only.

06-02-2012, 07:08 PM	#1 (permalink)
Wronka Base Member Join Date: Oct 2010 Location: Santa Clarita Posts: 47 Drives: 11 Nissan 370z Rep Power: 14	Help hardwiring radar detector I followed radar roys "how to hardwire a radar detector video" using an add a circuit to the lower left fuse box on the driver side. I have everything set up but I just don't know which fuse to tap. I am assuming I put it in the radio fuse. However, the add-a-circuit will fit into any of the fuse slots but the fuses wont fit into the add a circuit. what is going on here? do I need to buy a new type of fuse?

06-06-2012, 01:31 AM	#10 (permalink)
XwChriswX WFLYIDNNE Join Date: Jul 2009 Location: In The Fastlane Posts: 50,648 Drives: 02 GDB WRX Rep Power: 451	I'll go to mine tomorrow and take some pictures so you can see what the finished product looks like and which fuse to tap. If you have most radar detectors, you want to make sure not to go for anything higher than a 10AMP fuse. __________________ Bonnie - Stage 2, Audio build coming this fall! R.I.P. Abby 3/29/10 - 3/30/14

08-26-2012, 08:04 PM	#11 (permalink)
RUFFSTUFF Base Member Join Date: Apr 2012 Location: GEORGIA Posts: 233 Drives: 2012 370Z TOURING Rep Power: 13	Thanks for the tips... __________________ 2012 370Z Touring w/ NAV, Black Powdercoat, aFe Takeda CAI, Invidia Gemini Ti-tip Catback Exhaust, DVD/NAV bypass

08-27-2012, 11:16 AM	#13 (permalink)
djtodd Track Member Join Date: Jun 2012 Location: Lexington, SC Posts: 932 Drives: 2012 Nismo TT Rep Power: 3397	I tapped into the switched 12v to the 12v outlet in the console. The harness is accessible right under the shift boot cover. There are two harnesses. One runs to the 12v outlet (2 wire) and one to (I think) the bosch sensor that has 6+ wires. Last edited by djtodd; 08-27-2012 at 11:17 AM. Reason: I'm grammatically retarded

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
radar detector	bigZ	Exterior & Interior	15	07-29-2017 08:12 PM
help hardwiring radar detector	Wronka	DIY Section (Do-It-Yourself)	14	06-02-2012 04:38 PM
Radar Detector	bigaudiofanat	The Lounge (Off Topic)	11	02-09-2011 10:00 AM
What radar detector you use?	CHBGOGO	Exterior & Interior	40	10-06-2010 03:54 PM
radar detector	allenhhp	Exterior & Interior	31	06-02-2010 12:42 PM

06-02-2012, 07:30 PM	#3 (permalink)
Wronka Base Member Join Date: Oct 2010 Location: Santa Clarita Posts: 47 Drives: 11 Nissan 370z Rep Power: 14	yeah I saw that, I wish I had a home link mirror now but I don't lol

06-04-2012, 02:37 PM	#5 (permalink)
future370zzz Track Member Join Date: Dec 2011 Location: Bay Area Posts: 555 Drives: 10 Nissan 370z Rep Power: 14	I did the same hardwire and it work fine on mine. I used this one from Oriely's Littelfuse FHM200BP - Fuse Holder \| O'Reilly Auto Parts I think you are trying to push in the fuse too much or you need to flip the fuse around and try again. The fuse that you add to the "add-a-circuit" fuse holder doesn't hold the fuse like the stock fuse box. It will stick out a little but still works. That's what I remember. I just plugged it into a random fuse, maybe I should have used the radio one, but I chose the most accessible one. Everyone works fine...knock on wood.

06-04-2012, 09:12 PM	#6 (permalink)
martin82 A True Z Fanatic Join Date: Nov 2011 Location: los angeles Posts: 2,636 Drives: 12 Nissan 370Z MB M6 Rep Power: 19	I used a one of those from autozone or pepboys, it sticks out too much and I can't out tue cover back, also if I tried to flip it it wouldn't work....

06-05-2012, 08:51 PM	#7 (permalink)
future370zzz Track Member Join Date: Dec 2011 Location: Bay Area Posts: 555 Drives: 10 Nissan 370z Rep Power: 14	I took off the side kick plate and the whole plastic cover over the fuse box and put the fuse in the back away from the cover and it fit.

06-05-2012, 11:11 PM	#8 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141520	you guys can sandwich a small pig tail in the fuse contact to run detectors. either solder a 1.5A fuse or use 2 female space connectors for a mini fuse and e-tape it in series. you should be able to use the standard mini add-a-circuit though. the width/pitch is the same as the low-profile mini fuses.

08-31-2012, 08:11 PM	#14 (permalink)
cezar_1 Base Member Join Date: May 2012 Location: california Posts: 1 Drives: 12 Nissan 370Z NISMO Rep Power: 12	Tap it in the visor light its easier and short wire only.