|
Ok busted out the service manual, here is the factory wiring: The aftermarket harnesses from both Crutchfield and Car Toys did not match this correctly. I'll have to build my
|
|||||||
 |
|
|
LinkBack | Thread Tools | Display Modes |
|
|
05-13-2011, 08:44 PM
|
#1 (permalink) |
|
Base Member
Join Date: Apr 2011
Location: Denver
Posts: 169
Drives: 2009 370Z White
Rep Power: 16  |
Ok busted out the service manual, here is the factory wiring:
  The aftermarket harnesses from both Crutchfield and Car Toys did not match this correctly. I'll have to build my own. Couple questions for you guys. 1) There is no ground wire so I assume it is grounded through the radio chassis to the car chassis via the mounting bracket? So pin 15 (steering switch ground) and pin 8 (Illumination ground) don't go anywhere on an aftermarket radio, they must just be grounded to the car chassis? And the aftermarket radio must also be grounded directly to the car chassis? 2) What about pin 18 (speed sensor), no problem not having it hooked up? 3) AXXESS adapter uses grey/red and grey/blue wires, but attached which way to pins 6 and 16 (steering switch A and B)? 4) where can I pick up this M80 plug and pins? |
|
|
|
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Wiring harness Q | Haulnz | Audio & Video | 5 | 03-06-2011 06:29 PM |
| Where to buy the fog light wiring harness??? | tacoma151 | Exterior & Interior | 2 | 04-21-2010 05:00 PM |
| wiring harness PDF from fairlady Z? | Cjanik | Audio & Video | 2 | 12-10-2009 08:41 PM |
| Car wiring harness question | Mike | Audio & Video | 4 | 09-30-2009 04:57 AM |
| wiring harness | 510z | Audio & Video | 4 | 04-30-2009 06:05 PM |
2Likes
Hybrid Mode
