03-18-2011, 07:01 PM
|
#6 (permalink)
|
|
A True Z Fanatic
Join Date: May 2010
Location: Calgary
Posts: 1,861
Drives: 90 and 15 GMC Sierra
Rep Power: 423
|
Quote:
Originally Posted by 37Z
We'll do! Is it best to remove the rear passenger side panel (i.e. the panel where the seat belt retainer is located) to snake the power wire into the front hatch area?
I see from SlikNik video, he snaked the power wire to the rear of the door sill, then across to a existing hole in the carpert located under the center counsole, to the front of the hatch area.
Also, what length for the RCA wires if the amp is located in the front of the rear hatch?
|
I had gutted the car to sound dampin everything, so i removed the panel, but you don't have to if you have good fish line of some sort. I think i used 16 ft RCA's, i ran them down the drivers side, but depending on the plan you could go shorter, i all ready had mine from my last car, and i wasn't going to buy new ones as the ones i have are not cheap.
|
|
|
Similar Threads
Threaded Mode
