![]() |
According to the service manual, there are two pairs of wire for the "woofer amp. ON signal" and the "OFF signal". Input: (+) is 31 (white) (-) ground. Output: (+)
|
|||||||
|
|
LinkBack | Thread Tools | Display Modes |
|
|
#4 (permalink) |
|
Enthusiast Member
Join Date: Jun 2009
Location: Little Rock, AR
Posts: 425
Drives: 09 370Z Blue 6spd
Rep Power: 185 ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() ![]() |
According to the service manual, there are two pairs of wire for the "woofer amp. ON signal" and the "OFF signal". Input: (+) is 31 (white) (-) ground. Output: (+) 25 (green) (-) ground.
I would just run a turn-on wire to your fusebox underneath the driver side dash. Much easier and that's what I did for the amp. My amp had power and turn-on for a 2nd device or amp. So my converter is connected to my amp. |
|
|
|
| Bookmarks |
|
|
Similar Threads
|
||||
| Thread | Thread Starter | Forum | Replies | Last Post |
| Wiring Help! | Gmendez | Audio & Video | 12 | 11-10-2010 01:27 PM |
| re-wiring to keep vdc off | boosted180 | DIY Section (Do-It-Yourself) | 26 | 02-01-2010 11:12 AM |
| Wiring adapter? | 1slow370 | Audio & Video | 11 | 01-06-2010 02:56 PM |
| Speaker Wiring | bpd138 | Audio & Video | 24 | 09-04-2009 02:36 PM |
| wiring harness | 510z | Audio & Video | 4 | 04-30-2009 06:05 PM |