12-12-2010, 12:47 PM
|
#1 (permalink)
|
|
Base Member
Join Date: Dec 2010
Location: Houston
Posts: 1
Drives: Ram
Rep Power: 16
|
Quote:
Originally Posted by HKYStormFront
maybe put a thin layer of foam between the z logo and the grille to help insulate it?
if i had a Z, that sounds exactly what setup i would have
|
Home Depot sells a roll of 1/8th in. thick foam with an adhesive backing. It's around 7 dollars and is in their ac duct isle. Works great and there will be plenty left over use at random, buzzing panels etc.
Asking a 6.5 mid to run into the lower octaves while still being able to faithfully reproduce the signal all the way up to 2K plus the rolloff above the crossover frequency is a tall order. What you gain in the low octaves you would lose in the higher octaves in terms of volume of output of the mids.
A good 4 channel amp for your application will allow you to run the front component speakers with a high pass crossover and the other 2 channels should have a low pass crossover for your sub(s). With a high pass crossover on your front components, you can get them louder overall than without.
|
|
|
Similar Threads
6Likes
Hybrid Mode
