Lets talk about subs for a Zenclosures box

Originally Posted by Boosted Josh

I found out that my 500/1 will fit under the seat. So I sold my 450/4 on eBay and will be picking up a 300/2 for the front stage. The 300/2 is the same size as the 500/1 so it should work.

I think the jl slash series are good enough to handle being stuck under the seat without much air.

I also picked up a Rockford fosgate 3sixty.2 for the factory intergration.

Now I've got to decide if I want to run my 10w7 in the zenclosures box or not. They can cut the box for the 12" to fit the 10w7 but it is going to be a little smaller than what JL recommends. I've also got to figure out how to mount the 3 bar grill to protect the sub.

I could do it in an upfiring box but I don't know how it would sound.

The other option is to ditch the w7 and pick up something better suited to the boxes available.

Originally Posted by speedfreak28

Id get something better suited for a small enclosure, The w7 will lose alot of low end in that small of a box off 500 watts. You could defiantely sell it and have enougt to have plenty of options