Axxess ASWC wiring.

bigaudiofanat · 10-15-2018, 02:53 PM

https://www.youtube.com/watch?v=51b2mJf-hVU

RekeHavoc · 04-06-2019, 12:02 PM

Sorry to dredge up such an old post, but I'm looking for some help with this. I have the ASWC working...sort of.

I have red/gray to pink (pin 6) and blue/gray to blue (pin 16) per Matt's video. This is opposite of Metra's instructions, but seems to be working as I am able to manually program and get all of the buttons working. Would it not work at all if I switched these around?

My issue is that not all of the buttons seem to work reliably. The SOURCE button is perfect, VOL+ is decent, but VOL- rarely works. Is this a sign of a resistance issue in the circuit?

I have all of the wires soldered, but I am using the AHH-70-7552 harness and the ASWC 3.5mm connector since my radio is a 2-wire. Could these be adding resistance into the circuit? I'm wondering if I should bypass these and solder directly into the factory wiring.

10-15-2018, 02:53 PM	#1 (permalink)
bigaudiofanat Car Audio Installer Join Date: Jun 2009 Location: Magnolia DE Posts: 8,342 Drives: 2012 Infiniti G37x Rep Power: 855	https://www.youtube.com/watch?v=51b2mJf-hVU __________________ Need help with car audio or electronics? Let me know!! Need Help Let Me Know Direct email address reimermatt@gmail.com Owner of: Dynamic Mobile Audio Follow me below https://www.facebook.com/Dynamicmobileaudio/

Thread Tools
Show Printable Version Email this Page
Display Modes
Switch to Linear Mode Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
re-wiring to keep vdc off	boosted180	DIY Section (Do-It-Yourself)	26	02-01-2010 11:12 AM
Wiring adapter?	1slow370	Audio & Video	11	01-06-2010 02:56 PM
Speaker Wiring	bpd138	Audio & Video	24	09-04-2009 02:36 PM
Amp Wiring Path	JerryK	Audio & Video	6	05-08-2009 12:18 AM
wiring harness	510z	Audio & Video	4	04-30-2009 06:05 PM

04-06-2019, 12:02 PM	#2 (permalink)
RekeHavoc Base Member Join Date: Mar 2010 Location: Oakland, TN Posts: 61 Drives: 09 370Z 6MT Rep Power: 17	Sorry to dredge up such an old post, but I'm looking for some help with this. I have the ASWC working...sort of. I have red/gray to pink (pin 6) and blue/gray to blue (pin 16) per Matt's video. This is opposite of Metra's instructions, but seems to be working as I am able to manually program and get all of the buttons working. Would it not work at all if I switched these around? My issue is that not all of the buttons seem to work reliably. The SOURCE button is perfect, VOL+ is decent, but VOL- rarely works. Is this a sign of a resistance issue in the circuit? I have all of the wires soldered, but I am using the AHH-70-7552 harness and the ASWC 3.5mm connector since my radio is a 2-wire. Could these be adding resistance into the circuit? I'm wondering if I should bypass these and solder directly into the factory wiring.