Bose system 6x9 doors speakers

Originally Posted by bigaudiofanat

No because you have the bose system the amp sends out 2 signal to the front doors a low level for the woofer in the door and a high level that goes to the tweeters. In order to replace the speakers you would need to install a new amp. You could install those speakers but they aren't going to sound good at all because you aren't sending them a full range signal. And no you can't just tie the 2 signals together into the new speakers.

Originally Posted by redondoaveb

Thanks Matt. You had answered this in an email I sent you a week or so ago. I appreciate the input. What size wire feeds power to the stock Bose amp?

Originally Posted by bigaudiofanat

HAHA I thought so,

the stock wire is about a 16 gauge going to the woofer and a 18 gauge going to the tweeter. But it carries on the years. Some I did had 18 gauge for all the speakers. I would recommend doing a component set and running new wire from your new amp.

Originally Posted by redondoaveb

Thanks. I was wondering about what the size of the existing power wire size is that feeds the stock amp.