My little sub.

dvboy · 02-16-2016, 03:24 PM

Was debating if I wanted to finish my system off with a sub,got a great deal on Craigslist on a driver and went ahead with it.I mostly listen to rock,so I don't need/want a loud boomy sub,so i went with the JL 8W3V3 8" driver in a small sealed enclosure.Should provide nice tight clean bass,got the driver new in a box for $60,wood and carpet for $30,done!!Now I am just waiting on an amp,designed it so it would fit under the cargo cover,so it won't be easily seen.
_MG_4708.jpg

_MG_4710.jpg

_MG_4711.jpg

RonRizz · 02-16-2016, 03:59 PM

looks good !

kenchan · 02-16-2016, 04:41 PM

does that make the cargo cover flap at all? not sure how far away the cover is from the cone..

dvboy · 02-16-2016, 05:37 PM

I haven't hooked it up to an amp yet,it is just over a couple inches away from the cover,so it might do a little bit of a dance.

kenchan · 02-16-2016, 05:56 PM

oh, if couple of inches clearance, i am sure it is fine. i like the compact size.

dvboy · 02-16-2016, 06:38 PM

Thanks,I didn't want it to overtake too much interrior space as well as be easy to remove.

cellison1460 · 09-17-2016, 10:19 PM

Where did you get the Z logo

dvboy · 09-18-2016, 05:54 AM

Quote:

Originally Posted by cellison1460

Where did you get the Z logo

eBay

night blade · 09-18-2016, 08:06 AM

Looks good, I currently have a Bazooka BTA10100 hooked up in the same spot, used 2 tarp straps to hold it into place, what are you using to keep it in place?

dvboy · 09-18-2016, 09:20 PM

Quote:

Originally Posted by night blade

Looks good, I currently have a Bazooka BTA10100 hooked up in the same spot, used 2 tarp straps to hold it into place, what are you using to keep it in place?

If u look on the bottom right side of the sub,I have a piece of metal that bends down where there is a fastener for what I assume is for an external seat belt?Anyway,whatever that is,I have a bolt torqued down in that location.

night blade · 09-19-2016, 07:15 AM

Quote:

Originally Posted by dvboy

If u look on the bottom right side of the sub,I have a piece of metal that bends down where there is a fastener for what I assume is for an external seat belt?Anyway,whatever that is,I have a bolt torqued down in that location.

Well done, need to redo mine, such a clean install I'm

.

zmanelite · 09-20-2016, 08:42 PM

I have something very similar
I did a dress up cover for it with thin fiberboard and carpet

02-16-2016, 03:24 PM	#1 (permalink)
dvboy Enthusiast Member Join Date: Jun 2015 Location: Canada Posts: 269 Drives: 2016,M6 Rep Power: 25	My little sub. Was debating if I wanted to finish my system off with a sub,got a great deal on Craigslist on a driver and went ahead with it.I mostly listen to rock,so I don't need/want a loud boomy sub,so i went with the JL 8W3V3 8" driver in a small sealed enclosure.Should provide nice tight clean bass,got the driver new in a box for $60,wood and carpet for $30,done!!Now I am just waiting on an amp,designed it so it would fit under the cargo cover,so it won't be easily seen. _MG_4708.jpg _MG_4710.jpg _MG_4711.jpg Last edited by dvboy; 03-19-2016 at 02:18 PM.

02-16-2016, 03:59 PM	#2 (permalink)
RonRizz A True Z Fanatic Join Date: Aug 2011 Location: Pine grove, Pa Posts: 2,132 Drives: 2 feet, 3 pedals Rep Power: 6774	looks good ! __________________ P99rs Head Unit--- Amps- 2 Pioneer Prs800d --- Zapco ST1000MX---Zapco ST-4XSQ---- SI BM mk5 Subs---SI TM65v2 Midbass--- SI M3 mids--- SI M25 xbl2 tweeters ----- 2016 MECA street class 3rd place at world finals

02-16-2016, 05:37 PM	#4 (permalink)
dvboy Enthusiast Member Join Date: Jun 2015 Location: Canada Posts: 269 Drives: 2016,M6 Rep Power: 25	I haven't hooked it up to an amp yet,it is just over a couple inches away from the cover,so it might do a little bit of a dance. __________________ Pioneer AVIC 8000NEX,Hertz ML 1600,ScanSpeak D3004,Audison AV 5.1K,Helix DSP.2,Illusion Audio L10 Sub,RJM Clutch pedal,Stillen G3 long tube intake,Nismo exhaust,AAM S-line axle back,Ecutek tune

02-16-2016, 06:38 PM	#6 (permalink)
dvboy Enthusiast Member Join Date: Jun 2015 Location: Canada Posts: 269 Drives: 2016,M6 Rep Power: 25	Thanks,I didn't want it to overtake too much interrior space as well as be easy to remove. __________________ Pioneer AVIC 8000NEX,Hertz ML 1600,ScanSpeak D3004,Audison AV 5.1K,Helix DSP.2,Illusion Audio L10 Sub,RJM Clutch pedal,Stillen G3 long tube intake,Nismo exhaust,AAM S-line axle back,Ecutek tune

09-18-2016, 08:06 AM	#9 (permalink)
night blade Base Member Join Date: Apr 2015 Location: Pickering, Ontario Posts: 131 Drives: 2016 Nissan 370Z Rep Power: 9	Looks good, I currently have a Bazooka BTA10100 hooked up in the same spot, used 2 tarp straps to hold it into place, what are you using to keep it in place? __________________ 2016 Nissan 370z Base 6MT Pearl White \| RJM Performance 2012 Kia Sportage 6AT (the short bus)

02-16-2016, 04:41 PM	#3 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141520	does that make the cargo cover flap at all? not sure how far away the cover is from the cone..

02-16-2016, 05:56 PM	#5 (permalink)
kenchan A True Z Fanatic Join Date: Aug 2009 Location: N/A Posts: 76,801 Drives: N/A Rep Power: 141520	oh, if couple of inches clearance, i am sure it is fine. i like the compact size.

09-17-2016, 10:19 PM	#7 (permalink)
cellison1460 Base Member Join Date: Aug 2016 Location: Ohio Posts: 1 Drives: 2013 370z Rep Power: 8	Where did you get the Z logo

09-20-2016, 08:42 PM	#12 (permalink)
zmanelite Track Member Join Date: Nov 2013 Location: Anaheim Posts: 753 Drives: 370 Z Nismo Rep Power: 36	I have something very similar I did a dress up cover for it with thin fiberboard and carpet __________________ Instagram @zmanscm