6.5" full range behind seats?

patabq · 08-23-2015, 01:55 PM

I am thinking of putting 6.5" duel driver speakers behind the seats in my '16 Sport w/Bose. I can't find anyone who has done this. My stock Bose sub is not connected most of the time and I thought it might add some additional base. I will be putting 6.5 components in front. It looks like flush mount should fit in the rear. Anyone know if 6.5s flush mount (cut out stock speaker grill and enough for the 6.5s) will fit?

jcosta79 · 08-23-2015, 08:06 PM

I'm pretty sure the factory speaker is 3.5 inches. I'm not sure how you plan on fitting 6.5's back there. Plus you don't need them.

Sent from my Nexus 7 using Tapatalk

daveb91 · 08-26-2015, 07:58 PM

Bigfataudio makes pods in the cubbys.

patabq · 08-27-2015, 07:43 AM

Thanks. I can and have made speaker enclosures as well as designed audio components. I track the car and don't want enclosures I would need to remove for the track and for the harness. I have already removed the sub-woofer and spare.

I was just asking if anyone has cut out the plastic stock grills on the sides for larger speakers.

08-23-2015, 01:55 PM	#1 (permalink)
patabq Base Member Join Date: Jun 2015 Location: Albuquerque, NM Posts: 63 Drives: Corvette Z06 07 Rep Power: 9	6.5" full range behind seats? I am thinking of putting 6.5" duel driver speakers behind the seats in my '16 Sport w/Bose. I can't find anyone who has done this. My stock Bose sub is not connected most of the time and I thought it might add some additional base. I will be putting 6.5 components in front. It looks like flush mount should fit in the rear. Anyone know if 6.5s flush mount (cut out stock speaker grill and enough for the 6.5s) will fit?

08-23-2015, 08:06 PM	#2 (permalink)
jcosta79 A True Z Fanatic Join Date: Jul 2012 Location: N/A Posts: 1,430 Drives: N/A Rep Power: 14	I'm pretty sure the factory speaker is 3.5 inches. I'm not sure how you plan on fitting 6.5's back there. Plus you don't need them. Sent from my Nexus 7 using Tapatalk madwi likes this. __________________ 2012 PW NISMO #0559 - GT Spec Brace Kit - Swift Springs - ARK TP & Invidia CBE K&N Intake - UpRev Tune - 15mm Z1 Spacers & Studs - StopTech Slotted Rotors & SS Lines - ZSpeed CMAK with Stage 2 Clutch and Lightweight Flywheel

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[Help] Which wire to tap for full range signal?	sselemit	Audio & Video	10	04-23-2023 09:08 PM
[WTB] One "plug" " blank" for heated seats.	synolimit	Parts for sale (Private Classifieds)	3	10-21-2013 09:22 AM
RAYS 57Xtreme New for 2011 - 19" Staggered Concave Face // $2000 Range	RavSpec	Tires/Wheels	45	09-10-2013 02:29 PM
Amari Windsor Edition "Wide Arch" Range Rover Sport\| Vossen 22" CV3s	mike@vossen	Other Vehicles	0	07-10-2012 01:39 PM
Dark Reign \| Range Rover Sport \| 22" Limited Edition Matte Graphite Vossen CV1s	jav@vossen	Other Vehicles	2	02-25-2012 06:16 AM

08-26-2015, 07:58 PM	#3 (permalink)
daveb91 Enthusiast Member Join Date: Jul 2014 Location: Vienna WV Posts: 302 Drives: 370z Rep Power: 24	Bigfataudio makes pods in the cubbys.

08-27-2015, 07:43 AM	#4 (permalink)
patabq Base Member Join Date: Jun 2015 Location: Albuquerque, NM Posts: 63 Drives: Corvette Z06 07 Rep Power: 9	Thanks. I can and have made speaker enclosures as well as designed audio components. I track the car and don't want enclosures I would need to remove for the track and for the harness. I have already removed the sub-woofer and spare. I was just asking if anyone has cut out the plastic stock grills on the sides for larger speakers.