Another oil filter for Stillen oil cooler sandwich plate thread

[VQ37]

Hello all,

I know there are lots of threads that discussed about compatible oil filter for
Stillen oil cooler sandwich plate.

So far, I found two oil filters that works.

K&N oil filter HP-1008
Purolator Pureone PL10193
Mobil 1 M1-105

I know there is Fram filter too but I don't want to use that one.
It is hard for me to buy any of three filter above at local part store.
I saw one of post saying someone is using Mobil 1 M1-110 but not sure
if it's for Stillen sandwich palte.

Is anyone using Mobil M1-110 with Stillen sandwich plate?
Or does anyone use other oil filter besides oil filter that I mentioned?

Please reply if you do!

Thank you!!

[DEpointfive0]

I use:
Bosch D3312

Almost every, if not every WalMart carries it. $13 though...


EDIT: the cheaper 3312's from Bosch don't fit. The D3312 has a large enough o-ring area to seal.

[VQ37]

Originally Posted by DEpointfive0

I use:
Bosch D3312

Almost every, if not every WalMart carries it. $13 though...


EDIT: the cheaper 3312's from Bosch don't fit. The D3312 has a large enough o-ring area to seal.

Thanks for letting me know! Anyone else? I would like to list all compatible oil filters for Stillen oil cooler

[aszyd]

Originally Posted by DEpointfive0

I use:
Bosch D3312

Almost every, if not every WalMart carries it. $13 though...


EDIT: the cheaper 3312's from Bosch don't fit. The D3312 has a large enough o-ring area to seal.

Amazing! Who knew that I was searching for the Bosch equivalent for the Stillen plate? It must be providence.

[DEpointfive0]

Originally Posted by aszyd

Amazing! Who knew that I was searching for the Bosch equivalent for the Stillen plate? It must be providence.

It was a fluke, kinda.

I went to walmart with my sandwich plate and tested a bunch of the high dollar Frams... Then I saw that Bosch wrote the thread size ON the filter itself, 20mm. Then I saw the D3312 was big enough to fit/seal the plate.

[aszyd]

Originally Posted by DEpointfive0

It was a fluke, kinda.

I went to walmart with my sandwich plate and tested a bunch of the high dollar Frams... Then I saw that Bosch wrote the thread size ON the filter itself, 20mm. Then I saw the D3312 was big enough to fit/seal the plate.

I had considered doing that myself. Thanks for saving me the work!

[1slow370]

SO if the oe filter is roughly $8 cheaper than the stillen filter, it would take around 15 oil changes to pay off throwing out the stillen plate and buying a mocal one and new fittings. less if you can sell your stillen plate to some other sucker.

[G37Some]

Originally Posted by VQ37

So far, I found two oil filters that works.

1) K&N oil filter HP-1008
2) Purolator Pureone PL10193
Wut??) Mobil 1 M1-105

Im also interested about the results of m1-110 though. I've looked all over also the past 2 weeks and couldnt find m1105 in stores so I actually just ordered a few off this website:

M1-105 Mobil1 Oil Filter (PH3950, 51381, TG3950, M1105)

$7.79 each isnt too bad, standard 5$ shipping. Also as you can see in the hyperlink, it lists all the cross reference filters.

I just got the cooler installed last week end and am currently using the Fram filter.

Originally Posted by 1slow370

SO if the oe filter is roughly $8 cheaper than the stillen filter, it would take around 15 oil changes to pay off throwing out the stillen plate and buying a mocal one and new fittings. less if you can sell your stillen plate to some other sucker.

thats equal to roughly 75k miles of driving... i've had my car 2 years and only put 13k miles on it =\

[Super Werty]

Amsoil EA15K13...this is the taller one. I use it with my Fast Intentions oil cooler

AMSOIL AMSOIL Ea Oil Filters

[DEpointfive0]

Originally Posted by Super Werty

Amsoil EA15K13...this is the taller one. I use it with my Fast Intentions oil cooler

AMSOIL AMSOIL Ea Oil Filters

... You didn't read the thread title at all did you?

[Super Werty]

Originally Posted by DEpointfive0

... You didn't read the thread title at all did you?

I did, and just now I re-read it. What did I miss? He wants to know what filter will fit with an oil cooler sandwich plate....right? no?

[DEpointfive0]

Originally Posted by Super Werty

I did, and just now I re-read it. What did I miss? He wants to know what filter will fit with an oil cooler sandwich plate....right? no?

With a STILLEN sandwich plate. Not all sandwich plates are the same. I assume FIs is meant to use the stock filter. Stillen's is not designed to use the stock filter

[aszyd]

Originally Posted by DEpointfive0

With a STILLEN sandwich plate. Not all sandwich plates are the same. I assume FIs is meant to use the stock filter. Stillen's is not designed to use the stock filter

I think that is a mistake on Stillen's part. There are a few negatives to requiring a different filter than stock. One definitely has to be willing to do their own oil changes with this kit, or be prepared for hassle and/or mistakes.

[Super Werty]

Originally Posted by DEpointfive0

With a STILLEN sandwich plate. Not all sandwich plates are the same. I assume FIs is meant to use the stock filter. Stillen's is not designed to use the stock filter

ah I see, I was not aware the stillen plate didnt use stock filters sizes.

[aszyd]

FYI. The Bosch D3312 is too long to be installed on a 2012+ with the OEM oil cooler.