Custom "A" pillar gauge pod

Baer383 · 01-19-2013, 10:25 AM

"SOLD"

I just made this a couple of months ago and one of gauges broke so now I'm going a different route to monitor my engine.

These are shipped UPS to the lower 48 and I will need your "A" pillars sent(driver/pass) to me on exchange and they must be in like new condition.

Pay pal is preferred 52mm gauges

Glokwork · 01-19-2013, 04:02 PM

Great looking custom pillars GLWS

XwChriswX · 01-19-2013, 04:08 PM

For those that might be interested in these, what size gauges will fit in them?

GLWS.

Very clean looking.

Glokwork · 01-19-2013, 04:12 PM

Pretty sure innovate only makes 52mm 2 1/16" gauges

Baer383 · 01-19-2013, 04:16 PM

Quote:

Originally Posted by XwChriswX

For those that might be interested in these, what size gauges will fit in them?

GLWS.

Very clean looking.

52mm edited changed it .thanks Chris

XwChriswX · 01-19-2013, 04:21 PM

I'd be totally interested in these if I was working on a build right now.

Alstann · 01-19-2013, 10:11 PM

How much would I have to pay you if I were to keep my stocker? ^^

Baer383 · 01-19-2013, 10:23 PM

Quote:

Originally Posted by Alstann

How much would I have to pay you if I were to keep my stocker? ^^

To replace both left and right pillar covers is about $100 from Nissan

I was going to just fix these and put them like OE but I figured some body would want it ,this is only the 2ND set I made it takes too long and cost to much to do it.

logenl7 · 01-20-2013, 05:39 AM

You could always get a multigauge and another gauge and install this. The build can come later.. Knowning A/F ration and F.P. and other stats never hurts... even without boost...

Baer383 · 01-20-2013, 08:03 AM

Quote:

Originally Posted by logenl7

You could always get a multigauge and another gauge and install this. The build can come later.. Knowning A/F ration and F.P. and other stats never hurts... even without boost...

I'm not sure what I'm going to do but with my one gauge breaking it gives me an excuse to do something bigger and better and more than likely more expensive.

logenl7 · 01-20-2013, 08:18 AM

lol a $200-400 gauge is more than enough justification to spend 10K on some boost..

logenl7 · 01-20-2013, 08:19 AM

that being said..lol I'd buy your GTM kit the second you decieded to upgrade/go in another direction..

Baer383 · 01-20-2013, 08:24 AM

Quote:

Originally Posted by logenl7

that being said..lol I'd buy your GTM kit the second you decieded to upgrade/go in another direction..

LOL.I work on cars for a living so to tear into my car is as easy as putting on pants in the morning,and I had this SC kit for almost a year so looking for something to do when you can do it yourself is a easy decision.

Baer383 · 01-20-2013, 09:09 PM

All pm's answered

logenl7 · 01-21-2013, 07:10 AM

lol I need to get some gauges before I can buy this

01-19-2013, 10:25 AM	#1 (permalink)
Baer383 A True Z Fanatic Join Date: Aug 2010 Location: Lawrenceville,Ga Posts: 4,293 Drives: My foot up your azz Rep Power: 31	Custom "A" pillar gauge pod "SOLD" I just made this a couple of months ago and one of gauges broke so now I'm going a different route to monitor my engine. These are shipped UPS to the lower 48 and I will need your "A" pillars sent(driver/pass) to me on exchange and they must be in like new condition. Pay pal is preferred 52mm gauges __________________ 2013 ZL1 754 rwhp 747 rwtq Last edited by Baer383; 01-23-2013 at 07:39 PM.

01-19-2013, 04:02 PM	#2 (permalink)
Glokwork A True Z Fanatic Join Date: Jun 2011 Location: Roanoke, VA Posts: 2,657 Drives: 11 370Z MB 6MT Rep Power: 24	Great looking custom pillars GLWS __________________ Precision Turbo Tial Turbosmart Fast Intentions Seibon Prosport Advan AD08R HKS Hipermax IV Nismo Evo-R PW:JDM UpRev Pioneer Escort Volk CE28N Top Mount Single Turbo 551whp/482wtq@10psi

01-19-2013, 04:08 PM	#3 (permalink)
XwChriswX WFLYIDNNE Join Date: Jul 2009 Location: In The Fastlane Posts: 50,648 Drives: 02 GDB WRX Rep Power: 453	For those that might be interested in these, what size gauges will fit in them? GLWS. Very clean looking. __________________ Bonnie - Stage 2, Audio build coming this fall! R.I.P. Abby 3/29/10 - 3/30/14

01-19-2013, 04:12 PM	#4 (permalink)
Glokwork A True Z Fanatic Join Date: Jun 2011 Location: Roanoke, VA Posts: 2,657 Drives: 11 370Z MB 6MT Rep Power: 24	Pretty sure innovate only makes 52mm 2 1/16" gauges __________________ Precision Turbo Tial Turbosmart Fast Intentions Seibon Prosport Advan AD08R HKS Hipermax IV Nismo Evo-R PW:JDM UpRev Pioneer Escort Volk CE28N Top Mount Single Turbo 551whp/482wtq@10psi

01-19-2013, 04:21 PM	#6 (permalink)
XwChriswX WFLYIDNNE Join Date: Jul 2009 Location: In The Fastlane Posts: 50,648 Drives: 02 GDB WRX Rep Power: 453	I'd be totally interested in these if I was working on a build right now. __________________ Bonnie - Stage 2, Audio build coming this fall! R.I.P. Abby 3/29/10 - 3/30/14

01-19-2013, 10:11 PM	#7 (permalink)
Alstann Track Member Join Date: Oct 2011 Location: South Florida Posts: 882 Drives: 12 PW 370z 6MT Sport Rep Power: 16	How much would I have to pay you if I were to keep my stocker? ^^ __________________ 2012 Pearl White 370Z GReddy Twin Turbo

01-20-2013, 05:39 AM	#9 (permalink)
logenl7 Enthusiast Member Join Date: Sep 2012 Location: Marysville Ohio Age: 39 Posts: 357 Drives: 09 Nissan 370Z 6M Rep Power: 14	You could always get a multigauge and another gauge and install this. The build can come later.. Knowning A/F ration and F.P. and other stats never hurts... even without boost...

01-20-2013, 08:18 AM	#11 (permalink)
logenl7 Enthusiast Member Join Date: Sep 2012 Location: Marysville Ohio Age: 39 Posts: 357 Drives: 09 Nissan 370Z 6M Rep Power: 14	lol a $200-400 gauge is more than enough justification to spend 10K on some boost..

01-20-2013, 08:19 AM	#12 (permalink)
logenl7 Enthusiast Member Join Date: Sep 2012 Location: Marysville Ohio Age: 39 Posts: 357 Drives: 09 Nissan 370Z 6M Rep Power: 14	that being said..lol I'd buy your GTM kit the second you decieded to upgrade/go in another direction..

01-20-2013, 09:09 PM	#14 (permalink)
Baer383 A True Z Fanatic Join Date: Aug 2010 Location: Lawrenceville,Ga Posts: 4,293 Drives: My foot up your azz Rep Power: 31	All pm's answered __________________ 2013 ZL1 754 rwhp 747 rwtq

01-21-2013, 07:10 AM	#15 (permalink)
logenl7 Enthusiast Member Join Date: Sep 2012 Location: Marysville Ohio Age: 39 Posts: 357 Drives: 09 Nissan 370Z 6M Rep Power: 14	lol I need to get some gauges before I can buy this

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Custom A-Pillar gauge pod - lots of pictures	GaleForce	Exterior & Interior	602	05-07-2022 08:31 PM
WORK Varianza T1s Last Batch 19" or 20" Step Lip // Custom Color	RavSpec	Tires/Wheels	5	01-22-2013 09:38 PM
AIMGAIN Mesh Type G2M - 19" / 20" Step Lip - Custom JDM Wheel	RavSpec	RavSpec - JDMwheel	0	12-13-2012 11:43 AM
Custom "A" pillar gauge pods	Baer383	Exterior & Interior	41	10-17-2012 09:27 AM
WORK Meister S1 3 Piece - 19x11.0 (4.3" lip) - 19x12.5 (4.8" Lip) ** Custom GM color	RavSpec	Wheels & Tires	21	11-22-2011 09:08 PM