Motordyne M370 Intake manifold

Mike · 09-07-2011, 05:41 PM

450 shipped. I used it for about 4 months. Works great for most people, did nothing on my particular car.

Its off the car now and ready to go.

Mike · 09-07-2011, 06:13 PM

oh, and in addition to paypal, I also take visa and mastercard.

NewYorkJon34 · 09-07-2011, 08:13 PM

Why did it do nothing on your car?

Mike · 09-07-2011, 08:43 PM

I don't know. I think one or two others had the same experience, but others with similar mods had good gains also. My mods are Gen 3 intake, test pipes and invidia exhaust, and a Z1 tune, both before and after the intake. John spent a lot of time trying to get power out of it, but we just couldn't find any.

Mike · 09-08-2011, 07:48 PM

bump

kno · 09-08-2011, 07:51 PM

i wish if fit the vq35hr

Mike · 09-08-2011, 08:32 PM

it came from the VQ35HR originally!

mr_sk · 09-08-2011, 08:42 PM

I want this, but concerned it won't make power on the setup I'm about to drop in the car; FI LTH & FI RES CB, HKS drop-ins and post MAF hoses. Tried digging around to see results on a similar setup but couldn't find any.

Bump for a good member and good member.

Mike · 09-08-2011, 09:19 PM

For what its worth, I think I am one of about 3 people who didn't see gains. I really think its because my car is pretty strong to begin with, and from the 1200 mile point, over 70% of the miles on it have been on the racetrack, so it was broken in and is used a different environment than most here.

kno · 09-08-2011, 11:15 PM

Quote:

Originally Posted by Mike

it came from the VQ35HR originally!

woah woah it fits the 3fiddy vq35hr? hmmm very tempting pm your best price plz

Nismo221 · 09-08-2011, 11:38 PM

I got about +10 lbs of torque through out the power curve out of mine. It dropped in the middle to around +5 lbs of torque and still no tune yet. Good luck on the sell.

Mike · 09-09-2011, 08:43 AM

Quote:

Originally Posted by kno

woah woah it fits the 3fiddy vq35hr? hmmm very tempting pm your best price plz

no, it is the stock one from the hr, modified to fit the 370. You already have one.

erkthejerk73 · 09-09-2011, 09:09 AM

Quote:

Originally Posted by kno

woah woah it fits the 3fiddy vq35hr? hmmm very tempting pm your best price plz

i suggest you do a little research on this one

MattP725 · 09-09-2011, 09:38 AM

Does the stock engine cover fit on this?

kno · 09-09-2011, 09:55 AM

Quote:

Originally Posted by MattP725

Does the stock engine cover fit on this?

whhy?? it does if you take the top plate off

09-07-2011, 05:41 PM	#1 (permalink)
Mike The370Z.com Sponsor Join Date: Jun 2009 Location: Loganville, GA Posts: 5,944 Drives: 370z Rep Power: 2188	Motordyne M370 Intake manifold 450 shipped. I used it for about 4 months. Works great for most people, did nothing on my particular car. Its off the car now and ready to go. __________________ NISSAN: 75 280Z / 86 300ZX GLL /87 Sentra SE / 03 350Z / 23 Z Porsche: 93 968 / 23 Macan GTS / 93 968

09-07-2011, 06:13 PM	#2 (permalink)
Mike The370Z.com Sponsor Join Date: Jun 2009 Location: Loganville, GA Posts: 5,944 Drives: 370z Rep Power: 2188	oh, and in addition to paypal, I also take visa and mastercard. __________________ NISSAN: 75 280Z / 86 300ZX GLL /87 Sentra SE / 03 350Z / 23 Z Porsche: 93 968 / 23 Macan GTS / 93 968

09-07-2011, 08:13 PM	#3 (permalink)
NewYorkJon34 A True Z Fanatic Join Date: Jun 2009 Location: Naples, Florida Posts: 3,041 Drives: 09 Fairlady Z Rep Power: 1066	Why did it do nothing on your car? __________________ NewYorkJon34's Ultimate Z Build

09-07-2011, 08:43 PM	#4 (permalink)
Mike The370Z.com Sponsor Join Date: Jun 2009 Location: Loganville, GA Posts: 5,944 Drives: 370z Rep Power: 2188	I don't know. I think one or two others had the same experience, but others with similar mods had good gains also. My mods are Gen 3 intake, test pipes and invidia exhaust, and a Z1 tune, both before and after the intake. John spent a lot of time trying to get power out of it, but we just couldn't find any. __________________ NISSAN: 75 280Z / 86 300ZX GLL /87 Sentra SE / 03 350Z / 23 Z Porsche: 93 968 / 23 Macan GTS / 93 968

09-08-2011, 07:48 PM	#5 (permalink)
Mike The370Z.com Sponsor Join Date: Jun 2009 Location: Loganville, GA Posts: 5,944 Drives: 370z Rep Power: 2188	bump __________________ NISSAN: 75 280Z / 86 300ZX GLL /87 Sentra SE / 03 350Z / 23 Z Porsche: 93 968 / 23 Macan GTS / 93 968

09-08-2011, 07:51 PM	#6 (permalink)
kno Enthusiast Member Join Date: Apr 2010 Location: miami Posts: 330 Drives: 2007 350z Rep Power: 17	i wish if fit the vq35hr __________________ 07 solar orange 295whp_253wtq Miami SFZCC Rep

09-08-2011, 08:32 PM	#7 (permalink)
Mike The370Z.com Sponsor Join Date: Jun 2009 Location: Loganville, GA Posts: 5,944 Drives: 370z Rep Power: 2188	it came from the VQ35HR originally! __________________ NISSAN: 75 280Z / 86 300ZX GLL /87 Sentra SE / 03 350Z / 23 Z Porsche: 93 968 / 23 Macan GTS / 93 968

09-08-2011, 08:42 PM	#8 (permalink)
mr_sk Enthusiast Member Join Date: Jul 2011 Location: Brooklyn Posts: 393 Drives: 2011 Z Sport MT Rep Power: 15	I want this, but concerned it won't make power on the setup I'm about to drop in the car; FI LTH & FI RES CB, HKS drop-ins and post MAF hoses. Tried digging around to see results on a similar setup but couldn't find any. Bump for a good member and good member. __________________ Part out thread: http://www.the370z.com/parts-sale-pr...-dynodash.html

09-08-2011, 09:19 PM	#9 (permalink)
Mike The370Z.com Sponsor Join Date: Jun 2009 Location: Loganville, GA Posts: 5,944 Drives: 370z Rep Power: 2188	For what its worth, I think I am one of about 3 people who didn't see gains. I really think its because my car is pretty strong to begin with, and from the 1200 mile point, over 70% of the miles on it have been on the racetrack, so it was broken in and is used a different environment than most here. __________________ NISSAN: 75 280Z / 86 300ZX GLL /87 Sentra SE / 03 350Z / 23 Z Porsche: 93 968 / 23 Macan GTS / 93 968

09-08-2011, 11:38 PM	#11 (permalink)
Nismo221 Enthusiast Member Join Date: Sep 2010 Location: Decatur, Alabama Age: 37 Posts: 489 Drives: 2010 370z Nismo Rep Power: 16	I got about +10 lbs of torque through out the power curve out of mine. It dropped in the middle to around +5 lbs of torque and still no tune yet. Good luck on the sell. __________________ Stillen Gen 3, Motordyne M370 Intake Manifold, 25 row oil cooler, Z1 test pipes, Greddy Ti-C 70mm dual exhaust, 15mm front/20mm rear spacers, RE-11's, V1 detector, LED interior lights, LED tag lights, Password JDM CF engine and radiator cooling covers.

09-09-2011, 09:38 AM	#14 (permalink)
MattP725 A True Z Fanatic Join Date: May 2011 Location: Toms River, NJ Posts: 1,904 Drives: 2010 40th Rep Power: 19	Does the stock engine cover fit on this?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
[FOR SALE] Motordyne M370 Intake Manifold for sale	Mr.Squeeze	Parts for sale (Private Classifieds)	9	07-09-2011 12:19 AM
[FOR SALE] MOTORDYNE M370 Intake manifold Austin Texas - will ship	Kastley85891	Parts for sale (Private Classifieds)	16	05-11-2011 02:15 PM
motordyne M370 manifold - round 2	esfourteen	Intake/Exhaust	36	11-07-2010 07:51 PM
Motordyne M370 Intake Manifold Group Buy	Endgame	Intake/Exhaust	12	10-08-2010 12:43 PM